New Crabon Fibre Breaks

Last updated on April 26, 2010

After coming across a rather good deal for a barely used (installed, but removed before the bike was built up) set of 2009 Avid Elixir CR disc brakes with black carbon fiber levers (blades) I got them installed last night. While they felt soft at first, the brief ride that Danielle and I took around Stony Creek’s Trolley Trails got them about 50% bedded in. Even using a smaller rotor in the front than I’d previously had (160mm vs. 185mm) they seem to be quite sufficient stopping my heavy person on big 29er wheels.

Since I had to disassemble things a bit to fit the new rotors and such, I ended up swapping out the 2.2″ Kenda Nevegals that came with the bike for some 2″ Specialized The Captain Control tires that I’d picked up in the MMBA annual meeting fundraiser auction for $40. These are simply a larger version of the tire I’ve had on my 26″ bike since July 2008, and a tire that I rather like.

I also swapped out the NiteRider Rebel 1.0 computer for my old Cateye Strada Wireless, which despite having a large and somewhat fiddly speed sensor is much more readable and usable. The NiteRider Rebel 1.0 had two problems that I couldn’t get over. The first is the angle of the display coupled with my stem mounting and the stem angle, leading to the LCD being hard to read when leaning right over it or standing over the bike. The second is a lot of latency between button pushes (up to 1.5 seconds while moving) making it hard to switch modes and check things while en route. It would be hard to tell if a button press was not registering or simply being slow^†. Both of these were irritating enough to make me simply go back to the old computer.

With all of this working out it looks like I might have a pair of BB7s and a NiteRider Rebel 1.0 computer for sale soon. I might even consider selling off the Nevegals, although having some 2.2″ tires hanging around could be nice come winter, or if I’m heading anywhere sandy.

^†I suspect the device uses an interrupt on change for the wheel sensor then just polls the button, and has a few opportunities for user input to be slowly read. Perhaps their higher end computers are better.