 |
I spent a good part of yesterday and today disassembling and reassembling the Bianchi D.I.S.S. that I acquired on Monday. While it looked pretty good to begin with, the drivetrain (save for the chain) was actually pretty dirty. There was also a bunch of black dirt (chain lube / dirt gunk) hiding all over the frame and drivetrain. So, I took pretty much the whole bike apart, cleaned everything, then put it back together. (Here’s a photo of the shiny clean crankset, chainring, and chain.)
This included torquing everything to spec, re-seating the tires (with logos aligned, of course!), flipping the stem cap around so the logo faces the right way up, re-fitting the Oury grips, adjusting the brake levers, and all the other niggling things that are part of putting a bike together. The grips were fitted by first cleaning them, rinsing them with alcohol (99% isopropyl), then wetting them with alcohol and sliding them on. They appear to be drying nicely, although I’ve read that it may be best to fit them with either rubber cement or a spray adhesive. If this doesn’t hold, I’ll try another method.
It’s now all ready for riding, I just have to wait for a bit less ice on the ground and I’ll be able to ride. This bike might also be perfect for trying out the On-One Mary Bar which Bob loaned to me a few months back.
