Prototype 1 PCB (v1.0) in the enclosure with v1.0 end panel artwork, showing the front panel.
Date: 03/08/2009
Views: 475
|
Prototype 1 PCB (v1.0) in the enclosure with v1.0 end panel artwork showing the rear panel.
Date: 03/08/2009
Views: 528
|
Quickly hacked in test points allowing current consumption measurements to be taken.
Date: 03/15/2009
Views: 906
|
Twelve SDrive compatible Kingston 2GB SD cards.
Date: 03/16/2009
Views: 671
|
ATmega8-16PU with SDrive NUXX Firmware label applied.
Date: 03/29/2009
Views: 502
|
All the SDrive NUXX parts, except for the PCBs and enclosures, sitting sorted and ready to go.
Date: 04/09/2009
Views: 606
|
Fifty-one SDrive NUXX v1.1 PCBs.
Date: 04/15/2009
Views: 615
|
Nineteen SDrive NUXX PCBs being assembled.
Date: 04/16/2009
Views: 612
|
The first SDrive NUXX v1.1 PCB assembled. This will be used in one of the complete units.
Date: 04/16/2009
Views: 635
|
Leads from the resistors, crystal, and diode sticking out of the back of the production SDrive NUXXs. Time to trim these before fitting the capacitors.
Date: 04/18/2009
Views: 650
|
Leads from capacitors, crystal, and diode on 18 SDrive NUXXs after trimming.
Date: 04/18/2009
Views: 605
|
Sixteen of the assembled SDrive NUXX PCBs. They have all passed initial testing and are ready to be inserted into enclosures.
Date: 04/25/2009
Views: 684
|
Package of 55 front and rear panels.
Date: 04/28/2009
Views: 526
|
Front of the first completely assembled SDrive NUXX, with MetalPhoto end panels.
Date: 04/28/2009
Views: 713
|
Rear of the first completely assembled SDrive NUXX, with MetalPhoto end panels.
Date: 04/28/2009
Views: 609
|