Month: May 2009

New Air Compressor Output Stage

Published May 9, 2009

Today I replaced the output stage on the air compressor given to me by my coworker Brian. Beyond a small handful of brass fittings I replaced the regulator, added a filter, and adjusted the automatic shutoff. It now turns on at ~80 psi and shuts off at just over 100 psi, and everything I replaced or moved appears to be operating smoothly. There is a leak in the upper compression fitting on the line between the pump and tank (seen on the right here) which loses about 2 psi per minute, so I’ll probably replace that with a flexible line. The hard shutoff which is built into the manifold also leaks very slightly, but as I don’t want to spend time finding a replacement I’ll let it be.

With the purchase of a rather nice Goodyear hose, blower handle and tips, brass quick disconnects, and a tire inflator from Harbor Freight, I think I’ve got everything for it that I need. It would be nice if it held pressure, but as I don’t intend to store it pressurized I’m not too concerned.

Leave a Comment

Toronto!

Published May 8, 2009

Danielle and I have just returned from visiting Dominic / while he is in Toronto for a wedding. We drove up there on Wednesday morning, stayed at a hotel in North York, and back this (Friday) evening. We’ve done a lot in the last few days, and here are some of the more memorable things:

· Ate lots of coffee and doughnuts from Tim Hortons
· Visited Niagara Falls
· Went to the top of the CN Tower.
· Ate poutine at Smokes Poutinerie.
· Ate at Richtree.
· Was photographed by an art student (unfamiliar with her camera) playing The Getaway pinball in an arcade in PATH.
· Walked around lots and lots of the city.

Photos will come later, as soon as I get a chance to upload them. I still haven’t taken the time to upload the ones from the San Francisco area when I was visiting Jeff / in February. Those will come soon too.

Leave a Comment

Air Compressor

Published May 5, 2009

My coworker Brian just gave me his old air compressor, as he doesn’t really need it and doesn’t want it taking up space in his garage. This is very, very welcome as I’ve been wanting an air compressor for a while, and this seems like a good one. I may adjust the power cord, redo some of the plumbing, and add a safety valve, but that all shouldn’t be too hard to do.

Hmm. Now I also need to get some hose, blower, filter, tire inflater, etc. I think a visit to Harbor Freight is in order for non-pressure-critical parts like this.

Leave a Comment

Poor Suburban Planning

Published May 4, 2009

According to Google Maps and Earth, this is White Mill Road as it heads north from Wiloray Ave, as seen here on Maps. For some stupid reason this does not connect to the other half of the road, and the neighbors seem to have fenced it so it’s not passable by bike or foot. South of that intersection is this nice, but clearly seasonal dirt path leading not far to the other part of White Mill Road.

This all disappoints me, because this is the one point which would make a route between 22 Mile and 23 Mile Roads, east of Mound and west of M-53, possible on bicycle without riding on paths/sidewalks or cutting across large grassy areas (baseball diamonds) in parks. After showing my friend Erik the route to work from yesterday he was finding some potentially alternate connectors for me, which would cut down residential streets instead of along sidewalks. This was one of those connectors, and when I went to check it out for a short post-work ride, it was rather disappointing.

On the upside, I did come across these dirt tracks which I’ll investigate when my bike has knobby tires back on it. I half expect these to lead to some dirt jumps I’d been told about before, or if nothing else they might just make for interesting siteseeing.

Leave a Comment

Customs Declarations

Published May 4, 2009

Filling out customs declarations is a real big hassle. Because of their odd size they must all be hand-written. Additionally, when I dropped all of these international SDrive NUXX orders off at the Post Office, the person working at the counter admonished me for sticking the declarations to the back of the packages. This bothers me because there isn’t enough room to fit them on the front of most small packages, the directions do not indicate that one should apply them to any particular area of the package, and I’ve historically had no problem with them stuck to the back.

Ah well, at least all the international shipments are set. Now I just need to sell a few more so that I break even on the project and everything will be set. Oh, and prep the CAD and artwork files for release…

Leave a Comment

Safe Route To Work

Published May 3, 2009

Today I decided to ride to work and back, just to test out the route. There are basically two routes I can take, but one involves riding in rather busy, shoulderless, 45 MPH roads. I took the other route, which I’ll call the “safe” route, which is a mix of sidewalks, paved paths, and rail trails. Also, before anyone gets too upset about my saying sidewalks, know that most of these are as wide as a typical cycling path, and have very few driveways or roads crossing them. They are also generally situated between fences or berms bordering what I call “island-neighborhoods” and major roads. That is, neighborhoods which have a single entrance/exit to the main road and do not connect each other, and thus don’t provide good residential streets for riding through.

The ride there was a bit more difficult than the return, as there was an almost-constant headwind, and it’s mostly uphill the whole way. The route is 15.4 miles one way and has total of ~1144 ft (~349m) of climbing, with much of that being in the last few miles. The route itself is quite nice, with the middle part going through Rochester, MI, under a nifty looking concrete bridge, and through some nicely wooded wetlands. There’s only a few areas which are actually unpleasant to ride, most of which involving crossing larger local roads.

Hopefully I’ll actually ride to work in a week and a half or so, possibly on the 15th of the month. I figure that I’ll bring a change of clothes and food to work the day before, and leave my laptop there. Then I’ll be able to ride both to work and back home with only cycling supplies.

If you’d like to see it, here is a KML of the route from my house to work. Note that it works just fine in Google Earth doesn’t currently work in Maps: 03-May-2009_TestRouteToWorkSafe.kml

Here’s three photos from the ride, too:

· Sitting on a grassy hill outside of one of the buildings I work in, eating some almonds and taking a break before heading home.
· Beneath Rochester Road, looking south, just south of Downtown Rochester, off of the Clinton River Trail, while on the way home from a test ride to work.
· Looking north along the underside of Rochester Road towards the Croskey Lanni building.

Leave a Comment

Functional / Safe Rear Wheel

Published May 2, 2009

After getting home from Danielle’s house (and listening to one episode of This American Life each direction) I spent some time finishing off my rear wheel. Once it was dished to my satisfaction, trued, and reassembled I fitted it to my bike and went for a series of test rides. The tire was the Continental TravelContact at 55psi, which is what was on the bike when the last two nipples broke.

The first was a rather uneventful jaunt around the neighborhood using the Winwood Decksters, so then I decided to go for a bit longer ride. After donning a headlight I took off on the ~15 mile local loop, up to (and through) River Bends, back down 21 Mile, through a neighborhood, then over to my house. Along this entire route I made a point of keeping my weight over the rear wheel as much as possible, especially when going up sidewalk aprons, over large cracks in the pavement, roots, sticks, etc. Basically, I was trying to put a bit more than normal (for me) force on the wheels.

Half-way through the ride, in River Bends, a quick check showed that the wheel was just as true as when I’d left the house. Even better, I wasn’t hearing any of the occasional spoke-twang sounds from that wheel. They were still occasionally there from the front (especially when cornering hard), but the rear was spot-on.

I’ll definitely be rebuilding the front wheel in the same way quite soon. Hopefully that will be the last time I touch them.

Leave a Comment

Tilling A Garden

Published May 2, 2009

Tilling the garden in Danielle's back yard which is being put where their pool had previously been.

Danielle is wanting to get her garden planted, so today she rented a tiller and I got to work on the gardens at her family’s house. Earlier in the day it had been covered by compost by her and her dad, and with the underlying sand all that it needed was a tilling.

I’d never actually used a rototiller, but it really wasn’t too bad. My arms and elbows are a bit sore from both keeping it moving and holding it back to prevent it from walking on the soil and not digging in. Beyond the 26′ circle shown above where the pool was, there was also another rectangular garden to be done, so I’m feeling a bit worn out.

Then, after the tilling there was anti-weed sheeting to lay, bricks to place, pavers to set, and her brother’s truck (which she’d borrowed to get the mulch) to wash. I’m pretty worn out. Hopefully I’ll still be able to get my bike wheel finished up before going for a test ride this evening.

Leave a Comment

Nipples: Replaced

Published May 2, 2009

After four and a half hours (or so) of work, all of the alloy nipples in my geared bike’s rear wheel have been replaced. While the wheel is pretty true (maybe 0.5mm out at the largest spot) the dishing is still about 5mm off, so I’ll have to do more playing another day.

Also, that image above shows one of the feeler gauges recommended in the Wheelpro Book. It seems to work pretty well, although I do need to get better at using it. I imagine that will take quite some time.

(I also must fix the damned Park SW-40 spoke wrench. Its got a nice head on it, but the curved handle part bends too far over the head, so when the spoke comes off of the nipple at a slight angle the tool gets stuck in place.)

Leave a Comment

Plastic Bottles from Sally Beauty Supply

Published May 1, 2009

Plastic bottles purchased from Sally Beauty Supply for applying boiled linseed oil to bicycle wheel parts.

At lunch today I purchased these two plastic bottles from Sally Beauty Supply to be used in applying boiled linseed oil to the spokes and nipples when rebuilding my bicycle wheels. I think I’ll give this a go after work today, as I’ve got a bit of time this evening and I could use a nice, focused, new project like this.

I’m just hoping that the hole on the tip of the larger bottle is small enough to allow for one drop at a time. It’s about 1mm, so I think it should be sufficient. If not, I guess I’ll just go to a dollar store, buy some cheap eye drops, empty the bottle, then use it. I think this will be all right, though.

Leave a Comment