Press "Enter" to skip to content

Functional / Safe Rear Wheel

Last updated on May 3, 2009

After getting home from Danielle’s house (and listening to one episode of This American Life each direction) I spent some time finishing off my rear wheel. Once it was dished to my satisfaction, trued, and reassembled I fitted it to my bike and went for a series of test rides. The tire was the Continental TravelContact at 55psi, which is what was on the bike when the last two nipples broke.

The first was a rather uneventful jaunt around the neighborhood using the Winwood Decksters, so then I decided to go for a bit longer ride. After donning a headlight I took off on the ~15 mile local loop, up to (and through) River Bends, back down 21 Mile, through a neighborhood, then over to my house. Along this entire route I made a point of keeping my weight over the rear wheel as much as possible, especially when going up sidewalk aprons, over large cracks in the pavement, roots, sticks, etc. Basically, I was trying to put a bit more than normal (for me) force on the wheels.

Half-way through the ride, in River Bends, a quick check showed that the wheel was just as true as when I’d left the house. Even better, I wasn’t hearing any of the occasional spoke-twang sounds from that wheel. They were still occasionally there from the front (especially when cornering hard), but the rear was spot-on.

I’ll definitely be rebuilding the front wheel in the same way quite soon. Hopefully that will be the last time I touch them.

Leave a Reply