|
The Draw-Tite hitch, part number 24763, arrived in this Cequent Towing Products box via UPS, from Plattsburgh Spring Inc, drop shipped from Florida.
Date: 03/01/2008
Views: 75
|
Strapped to the right side of the hitch was a plastic bundle containing a drawbar, installation instructions, hitch pin, and cotter pin.
Date: 03/01/2008
Views: 30
|
The mounting hardware, hitch pin, cotter pin, part of the installation instructions, socket wrench, sockets, and extensions.
Date: 03/01/2008
Views: 27
|
|
The rear of my (rather dirty) 2006 Honda Civic EX showing the installed hitch.
Date: 03/01/2008
Views: 69
|
This Honda plastic rivet could not be fitted back into the vehicle because the plastic shroud beneath the vehicle doesn't quite fit the same after installing the hitch.
Date: 03/01/2008
Views: 31
|
The passenger side of the hitch mount, showing the rubber retention mechanism which holds the exhaust up.
Date: 03/01/2008
Views: 39
|
|
Looking down the length of the underside of the hitch from driver to passenger side.
Date: 03/01/2008
Views: 40
|
Detail of where the driver's side of the hitch mount connects to the frame beneath a plastic shroud. The empty mounting hole on the shroud shows where the rivet should have been fitted.
Date: 03/01/2008
Views: 30
|
Detail of the underside of the center of the hitch, which hangs from the tow hook.
Date: 03/01/2008
Views: 32
|
|
Detail showing where the hitch fits beneath the exhaust heat shield and around/above the tail pipe.
Date: 03/01/2008
Views: 32
|
Slightly different angle showing where the rack bolts to the frame behind the heat sink.
Date: 03/01/2008
Views: 34
|
The box for the Thule T2 rack is enormous. This is how it was delivered from backcountry.com.
Date: 03/06/2008
Views: 37
|
|
Looking inside of the box shows a few disshoveled components. I believe it had been returned.
Date: 03/06/2008
Views: 46
|
All the parts for the Thule 917 T2 rack spread out on the floor. The instructions were missing.
Date: 03/06/2008
Views: 30
|
Detail of the surprise extra, rather scratched pipe end cap which was in the box with the rack.
Date: 03/06/2008
Views: 25
|
