Salsa El Mariachi Ti Rebuild (2013 to 2014)

Just before Christmas I was cleaning up my beloved 2013 Salsa El Mariachi Ti to put it away for the winter when I noticed a crack in the frame (photos: 1 · 2 · 3). Back in mid-October, around the time of the Fun Promotions 8 Hours of Addison Oaks race, I began hearing a ticking sound when pedaling hard. I chalked this up to cassette noise that’d plagued the bike in the past and kept on riding. It turns out this noise was a mostly-broken seat stay; something which I didn’t notice until I finally washed the bike. Something which I likely rode on at Iceman 2015 and in Marquette…

Since this was purchased new I was eligible for a warranty replacement, but as Salsa no longer makes this frame I was only able to get a 2015 Spearfish, with Fox CTD rear shock, as a replacement. A great frame (photos), of comparable value, but not what I wanted.

After a bit of searching I found Belgen Cycles in Richmond, VT who had brand new, old stock, 2014 Salsa El Mariachi Ti frames available. I purchased one (new, and thus another warranty), picked up a few parts, and rebuilt my bike. Using a mixture of parts from the 2013 El Mariachi Ti and some new bits (drivetrain, tires, saddle, bottle cages) I’ve now got a bike that I’m excited to ride once trails are ready.

The complete build is as follows:

Frame: 2014 Salsa El Mariachi Ti, Medium, w/ 142×12 Alternator dropouts
Fork: Fox Racing Shox OE, CTD w/ Open Bath Damper (Rebuilt by Fox)
Headset: Cane Creek 40 ZS44/EC44
Crankset: Truvativ 2011 2×10 X0 GXP (00.6115.422.070, Blue)
Bottom Bracket: Truvativ GXP (XR / Black)
Chainring: SRAM X-SYNC Direct Mount, 32t
Derailleur: SRAM GX 1×11
Shifter: SRAM GX 1×11
Shift Cables: Jagwire (Bulk)
Cassette: SRAM XG-1150 (10-42)
Brakes: Shimano XT, Levers: BL-M785, Calipers: BR-M785, Front Rotor: SM-RT67-M (180mm), Rear Rotor: SM-RT67 (160mm)
Stem: Salsa Pro Moto 1 (100mm)
Bar: Salsa Bend 2 (23°)
Wheels: Light Bicycle 35mm rims, DT Swiss 240 hubs w/ Bontrager 54 point ratchets, XD driver
Tires: Front: Schwalbe Racing Ralph HS 425 29 x 2.35″, SnakeSkin, TL Easy / Rear: Specialized Fast Trak GRID 2BLISS Ready, 29 x 2.2″
Seatpost: Thomson Elite (Straight, 27.2mm x 410mm)
Seatpost Collar: Salsa Lip-Lock (32.0mm)
Saddle: Specialized Phenom Comp, 2016 style, 145mm
Pedals: Crank Brothers Eggbeater 3 (Blue)
Grips: Ergon GP1 BioKork (Large)
Other Bits: Niner YAWYD top cap w/ Southern Tier cap, Garmin Edge 510, Garmin GSC-10, Mirracycle Original Incredibell, Specialized Zee Cage II (1x Left, 1x Right), Planet Bike Superflash Stealth

The bike is currently built with tubes, and as pictured weighs just under 26 pounds. For now the tubes serve to stretch the tires and press the rim tape into place. Once it’s time to ride I’ll switch to tubeless which should drop a bit more weight. While the rear-center of the bike is slightly shorter due to pivoting the Alternator dropouts all the way forward, I suspect that this build will ride nearly identically to the 2013 El Mariachi Ti. I hope it does, as that bike helped me complete quite a number of personal accomplishments. I hope that just as many great memories can be made on this one.

Big, big thanks to Zac and Josh and the other folks over at Rochester Bike Shop for helping me through the warranty process, getting a replacement, and dealing with my very particular order for the other parts that I wanted.

Photos of the complete bike, including some of the parts and steps of the build process, can be seen by clicking either the image above or here.

2 Comments

  1. Chris:

    How are 54t ratchets holding up? I am pretty sure you also posted the youtube vid showing the 54t on a 29+ mtb bike. Trying to make up my mind now on the 36t or 54t ratchets for my Stache 9 29+. Let me know if your like yours and any issues, also do you think the 54t are to loud? I came across this site from some web research.
    Thx
    Chris

  2. john:

    Did you strip the paint off the Alternator Dropouts? Seems like a good idea to me!

Leave a comment