Press "Enter" to skip to content

nuxx.net Posts

Odd LCD Problems in Ivan’s P3

Published May 13, 2008

For some reason, when booting the P3, it drops the first two letters of the 'Firmware check..' message. I'm not sure if this is the P3 mainboard booting faster than the LCD, or what.

Upon arriving home from work today I found a white box in the mail from Scotland indicating that the new LCD for Ivan’s P3 had arrived. This is the replacement that Colin (the Sequentix guy) offered to people as a replacement for PLEDs which had failed. After eating a bit of dinner I set to installing it.

Because of the spacing of the LCD and function switch board I had to file away a bit of the PCB in order to make it fit nicely. Thankfully Sequentix’s page on the replacement LCDs had mentioned this, so I was expecting to do it.

All in all, it went well. After getting the LCD working I installed the v4 firmware and MemX board, getting the machine wholly up to date.

I’m running into a bit of weirdness with the LCD, though. As can be seen on this page of photos, the display seems to be cutting off some characters during boot, corrupting others, and occasionally causing weirdness. I’ve tried making a new cable and replacing the IC directly connected to the LCD, but that hasn’t been successful. I’m really afraid that the controller on the LCD may be messed up. Hopefully tomorrow I’ll be able to use one of Ivan’s spare LCDs which he was sent (by way of me) by Crystalfontz as replacements for his failed PLEDs.

UPDATE: I just emailed Colin, the Sequentix guy, and asked for suggestions. After talking with a few people I’m starting to feel certain that the problem may simply be that the LCD doesn’t start up fast enough for the P3. It seems that with the HD44780 protocol the LCD talks the user can set up custom characters in the CGRAM (character generator RAM). While I may be way off base, I’m thinking that the P3 sets up the special characters it needs on boot, then tries to display stuff. I think that if the LCD isn’t running stable yet then these characters, along with data written to the display controller itself, could become corrupt or lost, displaying the symptoms like what I’m seeing. Hopefully I’ll find out for sure soon. If this is the problem then a fix would simply require the P3 to wait for another 250ms (or so) at power-on.

Leave a Comment

HP/EDS and Fog

Published May 13, 2008

Fog seen looking out my front window / doorwall on the morning of 13-May-2008.

When I was leaving for work this morning, and throughout almost the entire drive, it was abnormally foggy. This was really nice, as I like fog, I just wish I could have gone out in the woods on my bike and enjoyed it that way.

Also, it’s been confirmed that HP is going to buy EDS. I don’t know many details, except that EDS will probably maintain its name / brand, and that the drastic (~25% or so) increase in EDS’ share price made my 401(k) go up a bit, which is kinda nice.

Leave a Comment

The stuff one finds in the woods…

Published May 11, 2008

An old Civil Defense vehicle found amongst a bunch of trailers and mobile homes at the end of a road, right near the aforementioned tree farm.

One sure can find odd things back in the woods.

I’ve recently returned from visiting my grandparents up north and doing a bunch of biking along the roads and trails, finding all sorts of interesting places which I’d like to explore more in the future.

I ended up having to put the knobby tires back on my bike for the offroad riding, but I was glad I did. I had no problems wandering around all sorts of fire trails, dirt roads, and other random, interesting areas. One of those more interesting areas was what I first thought to be an oil drilling dumping ground. It contained all sorts of interesting metal parts, old vehicles, trailers (including some marked radioactive), and other discarded stuff. After talking to my grandparents it turns out that I was on the property of a friend of theirs named Charlie who happens to collect a bunch of stuff like that. Best I can tell, he is also the owner of the old CD vehicle seen above. (If any of you can figure out the city it is from based on this photo I’d love to know.)

While I didn’t go that far (only about 30 miles over the two days), I do definitely want to head back up there and do some more riding. I would definitely like to tackle the portion of the North Country Trail which I happened to come across, but I’m not really sure if it can be legally biked. The information I come across on this seems very, very mixed. I figure if I’m careful, stick to the trail, and don’t bother anyone it won’t be a problem. That said, I turned back at this point because it was too steep for me to ride up. There is, of course, a whole bunch of ORV trails in the area, but they are too sandy to ride on a bike. Even my wide knobby tires regularly sank in past the rim.

If you’d like to see the KMZ aggregated to cover most of this weekend’s riding it can be found here, with the nodes differentiating things by ride and date: 10-11-May-2008.kmz

The rest of the photos, including the ones from when I headed out wandering on the sandbar off of Old Mission Point, can be found here: Up North (May 2008)

(Oh, and yes, I know those photos are a bit crap. They were taken with my old Nikon Coolpix 5400 which was nice for its time, but is now just so-so. Also, it’s big and not weatherproof one bit. I’m thinking I’ll probably replace it with one of these Olympus shockproof and waterproof, internally zooming cameras. The quality probably won’t be great on them either, but at least it’ll fit nicely in my bag and I won’t have to worry about rain or a fall damaging it. Although, realizing that the camera is five years old, maybe those photos aren’t that bad…)

Leave a Comment

Traverse City Is Dull Unless You Like Shopping

Published May 10, 2008

I’m sitting in Espresso Bay in downtown Traverse City, leeching bandwdith from the first AP I found called ‘linksys’, tunneling everything via SOCKS (SSH tunnel). I drove up here yesterday in order to visit my grandparents who live about half-way between here and Grayling.

While I like visiting them, I find it a bit difficult to be in this area at times. I’d really, really like some nice veggie food, or at least some mostly-veggie Thai or Indian or Middle Eastern, but that doesn’t seem to be available. Despite being near water, seafood around here isn’t any fresher than it would be in Flint or Grand Rapids. There does seem to be a local organic / veggie eatery called the Homegrown Organic Eatery (WARNING! MySpace link), but it closed at 8pm. I think I’ll probably just end up grabbing a bean burrito from Taco Bell on the way back to my Grandparents’ place.

On the upside, I did get to do a bunch of outdoor things today. I first went for a bike ride, then swapped the touring tires out for knobbies, then went another 10 miles or so back on random trails that I came across in the woods. Some of the trails were particularly difficult because if the extremely (in many cases 100%) sandy soil in this area, but overall it was fun. I also managed to end up on some piece of property full of oil drilling remains, semi trailers (one marked Radioactive), campers, mobile homes, and other pieces of scrap. I think my grandpa knows the owner of the property and hopefully I’ll be able to get back there tomorrow with my camera and grab some photos.

My main reason for heading to Traverse City today was so that I could make my way up to Old Mission Point (at the 45th Parallel) and wander around the beach there. I ended up wandering down the beach, walking across a bunch of rocks, and ending up way out in the water on a rather interesting sand bar after quite a bit of walking. I think it’d be nice to bike up the peninsula one day, but it’s 18 miles (each way) of rather steep hills. The main road up to the point does have nice bike lanes on it, though. There are also some quite nice trails along the point in the park which might be good for riding around as well.

In lieu of other food I think I’ll just head back to my grandparents house now and grab a bean burrito from Taco Bell on the way. My grandma made turkey for dinner, but that’s one meat I particularly don’t like. No matter what it always tastes dirty to me.

Oh, something very positive: lunch today was pizza from the small convenience store near my grandparents house. While picking up the pizza with my grandpa I found that the store carries a small assortment of very good beers along with the normal stuffs. There were probably two doors worth of better Michigan beers and other imported things. While I don’t plan on getting any beer this weekend, it’s nice to know that it’s available in the future.

5 Comments

La Jalisciense Corn Tortillas

Published May 7, 2008

A fresh corn tortilla from La Jalisciense in Detroit cooking on the stove with some shredded cheese on it. What a wonderful dinner / snack.

On Monday Danielle was in Detroit while her mom was having some stuff done at the hospital, so she swung by Mexicantown and picked up some La Jalisciense flour and corn tortillas.

One of these corn tortillas toasted on the stove, with a bit of cheese, makes for an absolutely wonderful late dinner / evening snack. I can’t stop eating them. Now to go make more, except this next one will be flour, I think…

Leave a Comment

Flat New Holland Beer: The Poet

Published May 6, 2008

Yesterday while Danielle was over I picked up a six pack of New Holland’s beer The Poet. I’m happy because Meijer is now carrying it, which makes it easy to pick up for enjoying with dinner. Unfortunately, all but one or two bottles of this beer seem to be as flat as you can see up above. There’s just no head / foam on it at all.

After finding the contact page on New Holland’s site I emailed Isaac Hartman, who is listed as the Ambassador of Great Beer (Sales). Hopefully he’ll respond and, at the very least, do what he can to ensure that their beer at Meijer is better in the future.

As this beer tastes pretty sweet, I’m figuring that it didn’t bottle condition right. Maybe New Holland gave Meijer a few cases of them expecting them to age a bit in the store room or on the shelf and instead they just went into refrigeration. Or… who knows. It’s definitely not right, though.

Leave a Comment

Roland TR-606 for Jan

Published May 6, 2008

Detail of the area around the tempo knob on the TR-606 showing that it's worn down to the paint.

Today after getting home from work I ate some carrots and hummus and hopped on my bike, intending just to run up to the bank and go to the ATM. Instead I ended up going to the ATM, then winding my way through industrial parks up to 24 Mile and M-53, where I turned around under the bridge after coming across this amusingly broken set of toy guns. I then wound my way home, taking time to ride through every industrial road / park I came across, racking up a total of 15 miles.

Yesterday I received this box in the mail, and tonight I opened it and grabbed some pictures. See, a guy by the name of Jan Czmok, who is the only person (that I know of) besides me to build a complete MIDIbox SID-NUXX (you can see his photos of his here) wanted to buy a for-repair TR-606 on eBay, but the seller would only ship to the US, so I’m relaying it for him. Here is a mirror of the auction, if you’d like to see it. For reference, the auction closed for $255.

I wish him luck in fixing it up because it’s not in particularly good shape. While it doesn’t seem to have a smell, the damage to it makes me think that it was either left in a garage for a few years, that it survived a flood, or maybe that it was just left at the bottom of a septic tank full of angry lobsters.

If you would like to see the full photos of the TR-606, click on this link.

2 Comments

SiI3124 Not Working… Right

Published May 5, 2008

Top view of the Koutech PSA421 on the antistatic bag. It has four internal single lane SATA ports.

Thanks to everyone who wished me a happy birthday today. You all made me smile lots. (Yes, I do share a birthday with Karl Marx, and yes, I am now 30.)

I received the SiI3124-based disk controller mentioned earlier, but it didn’t wish me a happy birthday. In fact, it just didn’t work as I hoped. For some reason its on-board option ROM isn’t starting up when the rest of the computer does, so it’s not initializing the disks and making the main BIOS aware of their existence. This prevents me from booting off of them. FreeBSD can talk to the disks on it just fine, but without the BIOS it’s not useful to me.

When I tried the card in my MAME cabinet and it works fine there, so I think something like the following is occurring: The on-board SATA / RAID controller is a SiI3114, and when I disable this via the BIOS, perhaps this somehow disables the SiI3124? Or, perhaps when the controller is enabled, the option ROM from one is interfering with the other? After all, the SiI3114 BIOS still loads and displays. I did also try changing the PCI enumeration order and tried the cards in other PCI-X slots and the lone PCI slot, and none of that produced positive results. The SiI3114 always enumerates first (or not at all?).

As a test I put a classic Adaptec AHA-2940UW (can you believe this card is more than 10 years old at this point?) card in the box and its option ROM displayed just fine. So, the motherboard seems to handle disk controllers in slots, just not this one.

Instead of the SiI3124-based card I really would like a 3ware 9550SXU-4LP, but its $319.99 price tag is a bit hard to stomach. Maybe I’ll just return the card and stick with the onboard controller and software RAID.

Oh, and if you want to see them, there are more photos of the Koutech PSA421 in banstyle.nuxx.net here on page 3 of my gallery.

4 Comments

Updated Resume

Published May 2, 2008

Page 1 of the latest copy of my resume, updated on 02-May-2008, just after midnight.

Today after getting home from work I decided that I would finally update my resume. It wasn’t updated for any particular reason, but I felt that I should condense it a bit, incorporate the work I’ve been doing for the past six months or so, and generally tighten it up. So, I did.

While I still need to put together the plaintext copy (which shouldn’t be too difficult), and barring any last minute quirks or tweaks that might be needed, it’s done. If you would like to see it, here’s a PDF copy: steve_vigneau_resume_02may2008.pdf

If you are one of those folks who just doesn’t like PDFs, here’s it in two 150dpi PNGs: Page 1 · Page 2

Leave a Comment