Press "Enter" to skip to content

nuxx.net Posts

Traverse City Is Dull Unless You Like Shopping

Published May 10, 2008

I’m sitting in Espresso Bay in downtown Traverse City, leeching bandwdith from the first AP I found called ‘linksys’, tunneling everything via SOCKS (SSH tunnel). I drove up here yesterday in order to visit my grandparents who live about half-way between here and Grayling.

While I like visiting them, I find it a bit difficult to be in this area at times. I’d really, really like some nice veggie food, or at least some mostly-veggie Thai or Indian or Middle Eastern, but that doesn’t seem to be available. Despite being near water, seafood around here isn’t any fresher than it would be in Flint or Grand Rapids. There does seem to be a local organic / veggie eatery called the Homegrown Organic Eatery (WARNING! MySpace link), but it closed at 8pm. I think I’ll probably just end up grabbing a bean burrito from Taco Bell on the way back to my Grandparents’ place.

On the upside, I did get to do a bunch of outdoor things today. I first went for a bike ride, then swapped the touring tires out for knobbies, then went another 10 miles or so back on random trails that I came across in the woods. Some of the trails were particularly difficult because if the extremely (in many cases 100%) sandy soil in this area, but overall it was fun. I also managed to end up on some piece of property full of oil drilling remains, semi trailers (one marked Radioactive), campers, mobile homes, and other pieces of scrap. I think my grandpa knows the owner of the property and hopefully I’ll be able to get back there tomorrow with my camera and grab some photos.

My main reason for heading to Traverse City today was so that I could make my way up to Old Mission Point (at the 45th Parallel) and wander around the beach there. I ended up wandering down the beach, walking across a bunch of rocks, and ending up way out in the water on a rather interesting sand bar after quite a bit of walking. I think it’d be nice to bike up the peninsula one day, but it’s 18 miles (each way) of rather steep hills. The main road up to the point does have nice bike lanes on it, though. There are also some quite nice trails along the point in the park which might be good for riding around as well.

In lieu of other food I think I’ll just head back to my grandparents house now and grab a bean burrito from Taco Bell on the way. My grandma made turkey for dinner, but that’s one meat I particularly don’t like. No matter what it always tastes dirty to me.

Oh, something very positive: lunch today was pizza from the small convenience store near my grandparents house. While picking up the pizza with my grandpa I found that the store carries a small assortment of very good beers along with the normal stuffs. There were probably two doors worth of better Michigan beers and other imported things. While I don’t plan on getting any beer this weekend, it’s nice to know that it’s available in the future.

5 Comments

La Jalisciense Corn Tortillas

Published May 7, 2008

A fresh corn tortilla from La Jalisciense in Detroit cooking on the stove with some shredded cheese on it. What a wonderful dinner / snack.

On Monday Danielle was in Detroit while her mom was having some stuff done at the hospital, so she swung by Mexicantown and picked up some La Jalisciense flour and corn tortillas.

One of these corn tortillas toasted on the stove, with a bit of cheese, makes for an absolutely wonderful late dinner / evening snack. I can’t stop eating them. Now to go make more, except this next one will be flour, I think…

Leave a Comment

Flat New Holland Beer: The Poet

Published May 6, 2008

Yesterday while Danielle was over I picked up a six pack of New Holland’s beer The Poet. I’m happy because Meijer is now carrying it, which makes it easy to pick up for enjoying with dinner. Unfortunately, all but one or two bottles of this beer seem to be as flat as you can see up above. There’s just no head / foam on it at all.

After finding the contact page on New Holland’s site I emailed Isaac Hartman, who is listed as the Ambassador of Great Beer (Sales). Hopefully he’ll respond and, at the very least, do what he can to ensure that their beer at Meijer is better in the future.

As this beer tastes pretty sweet, I’m figuring that it didn’t bottle condition right. Maybe New Holland gave Meijer a few cases of them expecting them to age a bit in the store room or on the shelf and instead they just went into refrigeration. Or… who knows. It’s definitely not right, though.

Leave a Comment

Roland TR-606 for Jan

Published May 6, 2008

Detail of the area around the tempo knob on the TR-606 showing that it's worn down to the paint.

Today after getting home from work I ate some carrots and hummus and hopped on my bike, intending just to run up to the bank and go to the ATM. Instead I ended up going to the ATM, then winding my way through industrial parks up to 24 Mile and M-53, where I turned around under the bridge after coming across this amusingly broken set of toy guns. I then wound my way home, taking time to ride through every industrial road / park I came across, racking up a total of 15 miles.

Yesterday I received this box in the mail, and tonight I opened it and grabbed some pictures. See, a guy by the name of Jan Czmok, who is the only person (that I know of) besides me to build a complete MIDIbox SID-NUXX (you can see his photos of his here) wanted to buy a for-repair TR-606 on eBay, but the seller would only ship to the US, so I’m relaying it for him. Here is a mirror of the auction, if you’d like to see it. For reference, the auction closed for $255.

I wish him luck in fixing it up because it’s not in particularly good shape. While it doesn’t seem to have a smell, the damage to it makes me think that it was either left in a garage for a few years, that it survived a flood, or maybe that it was just left at the bottom of a septic tank full of angry lobsters.

If you would like to see the full photos of the TR-606, click on this link.

2 Comments

SiI3124 Not Working… Right

Published May 5, 2008

Top view of the Koutech PSA421 on the antistatic bag. It has four internal single lane SATA ports.

Thanks to everyone who wished me a happy birthday today. You all made me smile lots. (Yes, I do share a birthday with Karl Marx, and yes, I am now 30.)

I received the SiI3124-based disk controller mentioned earlier, but it didn’t wish me a happy birthday. In fact, it just didn’t work as I hoped. For some reason its on-board option ROM isn’t starting up when the rest of the computer does, so it’s not initializing the disks and making the main BIOS aware of their existence. This prevents me from booting off of them. FreeBSD can talk to the disks on it just fine, but without the BIOS it’s not useful to me.

When I tried the card in my MAME cabinet and it works fine there, so I think something like the following is occurring: The on-board SATA / RAID controller is a SiI3114, and when I disable this via the BIOS, perhaps this somehow disables the SiI3124? Or, perhaps when the controller is enabled, the option ROM from one is interfering with the other? After all, the SiI3114 BIOS still loads and displays. I did also try changing the PCI enumeration order and tried the cards in other PCI-X slots and the lone PCI slot, and none of that produced positive results. The SiI3114 always enumerates first (or not at all?).

As a test I put a classic Adaptec AHA-2940UW (can you believe this card is more than 10 years old at this point?) card in the box and its option ROM displayed just fine. So, the motherboard seems to handle disk controllers in slots, just not this one.

Instead of the SiI3124-based card I really would like a 3ware 9550SXU-4LP, but its $319.99 price tag is a bit hard to stomach. Maybe I’ll just return the card and stick with the onboard controller and software RAID.

Oh, and if you want to see them, there are more photos of the Koutech PSA421 in banstyle.nuxx.net here on page 3 of my gallery.

4 Comments

Updated Resume

Published May 2, 2008

Page 1 of the latest copy of my resume, updated on 02-May-2008, just after midnight.

Today after getting home from work I decided that I would finally update my resume. It wasn’t updated for any particular reason, but I felt that I should condense it a bit, incorporate the work I’ve been doing for the past six months or so, and generally tighten it up. So, I did.

While I still need to put together the plaintext copy (which shouldn’t be too difficult), and barring any last minute quirks or tweaks that might be needed, it’s done. If you would like to see it, here’s a PDF copy: steve_vigneau_resume_02may2008.pdf

If you are one of those folks who just doesn’t like PDFs, here’s it in two 150dpi PNGs: Page 1 · Page 2

Leave a Comment

Southern Tier’s Back Burner

Published April 29, 2008

Souther Tier's Back Burner Barley Wine poured into a glass.

Things have been a bit boring around here lately, with me working at my job, working on the new server, riding my bike, and trying to relax a bit, so I just thought I’d post this photo of Souther Tier‘s Back Burner, a decent (and quite hoppy) barleywine which I drank while watching The Life Aquatic with Steve Zissou with Danielle on Sunday night.

Today I got GEOM-based disk mirroring working on banstyle.nuxx.net, but in doing so I realized that the on-board SiI3114 controller only supports SATA/150 (aka SATA I) and thusly no NCQ, which disappointed me. To remedy this I ordered part number N82E16816104007 from Newegg.com, a Koutech PSA421 4-Channel Serial ATA & Serial ATA II 64-bit PCI Host Controller which appears to be a reference (or very standard) implementation of the SiI3124 PCI/PCI-X to 4 Port SATA300 chipset. This should fit in the one usable slot in the case and provide the SATA interface that I really want. I just wish it’d arrive sooner.

Leave a Comment

Loud and Fast

Published April 26, 2008

The two Opterons 885 CPUs, seated nicely in the sockets.

Yesterday I received very kindly sent FedEx package containing some spare computer hardware a friend of mine had, a pair of Opteron 885 dual-core 2.6GHz CPUs and 8GB of registered RAM, to be used in my new server.

I’ve been having some problems with it all, but I’m not quite sure what the cause is yet. With all 8 DIMMs fitted the machine kept hanging while installing FreeBSD 7.0. Per my friend’s suggestion I’m trying the install again with only one DIMM per CPU installed, as he said he’s seen problems with a fully kitted out machine installing some OS’, for som reason. For the first half of the memory things have gone just fine, so I’ll finish running through the pieces two at a time. After those tests I’ll run Memtest86+ on discreet pairs of DIMMs, then on the full 8GB.

I might also install XP on it so that I can run SiSoftware Sandra on it for a while, as it’s really good at eating a machine alive.

Unfortunately I can only run these tests during the day because the server is simply too loud to do otherwise. I measured it at 74dB while standing next to it at the keyboard, and the noise seems to be three distinct tones (low, mid, and high) caused by the different fans in the box. It’s really not much different from a siren. The noise is enough to bother me a bit while just sitting around the house doing other things, so trying to sleep while it is running would be just awful.

Oh, and some quick testing last night showed that it ran most things in openssl speed faster than my Mac Pro. Hopefully I’ll be able to run the whole DB from RAM.

Hmm, I just dropped the full 8GB back in there, turned on PowerNow! and ACPI 2.0 and I’m building ImageMagick to see how things go. While that runs I think I’m going to go for a bike ride.

Leave a Comment

Trail at River Bends

Published April 24, 2008

Riding from my house to the trail at River Bends Park, out to Ryan Rd, around the old Nike site, and back home.

I actually managed to leave work early enough today that I was able to go for a nice bike ride after work. It was only 1:16 and just over 16 miles long, but it felt good. I made my way from home over to River Bends Park in Shelby Township, then headed down the foot / bike trail through the woods. This is a 2.5 mile winding trail with some nice hills, sharp turns, and interesting things to look at. I found that the tires I have are pretty okay for this sort of trail riding, except on parts of the path. Oh, and I also found that moving quickly through a swarm of bugs while breathing heavily through one’s mouth is not particularly pleasant.

Since I’m uncomfortably stinky, and because I finally stopped at Trader Joe’s on the way home and purchased more deodorant (I’ve been out for a week), I think I’ll go shower. Oh, and my new server was actually delivered today, so I think I’ll unpack it and grab photos of it post shower. I also might try a new (to me) Southern Tier beer called Back Burner, but I’m not sure… Maybe I’ll just let that wait for tomorrow. I’ve already got enough things I still want to get done tonight.

Oh, want the KMZ of today’s ride? It’s here: 24-Apr-2008.kmz, and here it is in Google Maps. Please excuse the two tracks. Google Earth can’t merge tracks (I imagine there is a good reason for this), my GPS decreased the resolution when saving the current log to a file, and it seems that multiple Active Logs had to be created to deal with the number of points I was generating today. Oh, yeah, I decided to try doing one-per-second points which, as you can see, has resulted in a much smoother route plot. It’s too bad this relatively short ride filled 49% of the memory on the GPS. Maybe I really do need an SD based GPS data logger…

Leave a Comment