How To Burn Down A House

Click for more…

So yesterday I was at a friend of mine’s house when I noticed that he was throwing out an audio mixer. Asking why, I found out that someone had smoked it, then attempted to repair it. It’s current state was unknown, so I opened it up. What did I find? Something that made me worry about every single electrical repair the cuplrit may have ever done.

Why? Well, there it is right in the picture at the top… It seems that when the mixer was blown, two caps that are part of the photo preamps cooked. Well, instead of replacing them with the same parts, this “tech” chose to put together a bank of capacitors, then POT THEM WITH CANDLE WAX. Besides the fact that the bank of capacitors worked out to 50μf when the original parts were 47μf, this is so absolutely horribly dangerous. Using a potting compound that melts at a temperature around that of edible food and burns at not much higher? In a type of device which tends to get a bit warm with use? Guh.

It’s a good thing it was never turned on…

Fortunately I was able to replace the fire starters with $3 worth of proper components from Radio Shack. After fixing the cold solder joints on some jumpers that had been installed around burnt traces, I figured it was good. Well, it seems to be, and now this person can have his mixer back.

Still, I just can’t get over the idea of potting together electronics with candle wax… No matter how goth it is, it’s still a fucking stupid idea.