This evening I left work a little early to squeeze in a ride at River Bends before it got dark, and this ended up being a great evening. Because of a freshly fallen quarter inch of snow and a few days of below-freezing temperatures the ground was a beautiful white, and clearly visible and ridable half an hour after the sun had set. Riding comfortable along the ridge, sun just below the horizon, looking down at the oxbow lakes (ponds, really) along the Clinton River looking at the leafless grey-brown trees and mottled white forest floor was incredibly beautiful. I would love to have what I saw captured in a photo, but it’d be so difficult that I didn’t bother to try.
Besides just getting out for a ride, one other intention for today is to try out the On-One Floater tires (package photo) that arrived last week. I purchased these hoping for something with a similar knobbiness as a Surly Nate, but a bit cheaper. Last year I’d picked up a Big Fat Larry for the front, moving the original Larry to the rear, and while this was a decent setup it left me wanting for more traction in snow. While the Nate would have been my tire of choice for this, at $128.74 (shipped) for a pair of Floaters they are (per tire) less than half the MSRP of a comparable 120 TPI Nate. Roger picked up a pair of the Floaters earlier this year and was happy with being happy for general trail riding, so I figured I’d give them a go.
Last night I set them up with 20 PSI to seat and stretch the tires to shape, then today I rode them at 11 PSI (rear) and 9 PSI, and I’m really happy with them. At 1460g and 1462g each they added a total of 172g (0.38 pounds) to the bike, which is nothing to be concerned with given the radical increase in traction. The center / transition knobs are about 5.1mm tall on the Floater, versus ~3.15mm – 3.5mm on the Larry / Big Fat Larry, and they have a very square-ish shape as opposed to the Larry’s ramped triangle shape. Width came in at ~3.85″, which is a bit shy of the 4.0″ printed on the sidewall, but still a very acceptable width. On the Mukluk’s 82mm Surly Rolling Darryl rims the furthest-out side knobs are parallel with the sidewall, giving the whole setup a great profile and feeling. Here’s two photos showing tread detail: 1 – 2.
Normally with the Larry family tires I’d get a controlled, comfortable bit of slide/drift in corners; something which was very predictable and worked nicely. When on frozen surfaces it’d get a bit weird, and would at times wash out if I pushed a bit too hard. I wasn’t able to make the Floaters behave in the same way, and coupled with the deeper tread I think these will meet my desire for a snow fatbike tire.
Oh, and that monster truck feeling when one first gets a fatbike and rides through rough surfaces with impunity, holding lines that would have been considerably harder on a skinner tire bike? Tonight I had that feeling again while riding the frost heaved Swamp Loop at River Bends. It was rough, bumpy, crunchy, icy, and oh-so-much-fun.