Press "Enter" to skip to content

Month: June 2011

Whoops!

It seems I forgot how to ride single track in the dark. These scrapes and dent on my old helmet are from failing to account for a lack of depth perception (or shadows) when riding with only a helmet light, hitting a small downed tree at the very beginning of the River Bends trails, and falling on my shoulder and the back/side of my head. I also smacked the inside of my thigh with the top tube and that’s a bit sore.

I’m fine, but it sure was a quality fall and yet another reminder of why one should wear a helmet while riding in the woods. It also did a fine job of reminding me that obstacles disappear when your only light source is on your head. Oh well!

Leave a Comment

1up USA Quick-Rack

My new bike rack, a 1up USA Quick-Rack arrived today. I’ve had my eye on these for a while because they are well-engineered, well-made, simple, US-made, all aluminum and stainless steel racks that hold both wheels at once. Ever since getting my first real mountain bike at the beginning of 2008 I’ve used this Thule 917 T2 rack. While it works sufficiently, I didn’t like how it held just one wheel, it’s inability to fit in the trunk without folding down the seats, it obscuring my license place when folded up, and the amount of work required to fit two bikes on it without the bars and seats hitting each other. After Erik picked up one of these 1up USA racks for his new car I got to seeing how nice it is and I decided to finally get one for myself.

Along with the one-bike rack I picked up an add-on to allow a second bike to be carried. Because of how the arms work the bike’s position isn’t fixed side to side, and coupled with the second rack being slightly taller than the first it’s trivial to fit two bikes. This photo shows my single speed and the Titus easily fitting on the rack together, something which would require unbolting and adjusting the bars on the Thule, or turning the bars so they didn’t hit the other bike’s seat. This rack also folds up small enough that I could put it on the floor of the back seat behind one seat if needed.

The biggest downside to this rack is that there’s no built-in system for locking up bikes. The Thule had locks on the tire-holding arms, and while these are easily defeated I can’t help but think the presence of a lock provides a slight deterrence. As such I’ll likely be getting a U lock and cable so that, if needed, I can easily lock the rack to the hitch and then string the cable through the bikes. While I wouldn’t drive with this setup (for fear of cable rub wearing needlessly on paint) it’d be sufficient to keep the bikes from walking away while parked. Even just a simple cable through the rack, bikes, and tow chain loops may be sufficient as well.

If you’d like to see more photos of this rack, including the packaging it came in, please look in this album: 1up USA Quick-Rack

To remove a bike from one of these racks, simply deflate the front tire slightly and the arm will be free. It is also often possible to remove the front skewer, lift the rest of the bike off the rack, then pull the arm down over the tire.

9 Comments

Trader Joe’s Name Tag Classic Lager

Trader Joe’s Name Tag Classic Lager, a rebranding of Red Oval is the kind of beer that one drinks ice cold while sitting on the porch after doing a bunch of work.

I just did a bunch of trail work and it’s a nice night for sitting on the porch.

Leave a Comment

Short’s Brewing Company’s Bourbon Barrel Soaked Sustenance Black Beer

Shorts Brewing Company’s Bourbon Barrel Soaked Sustenance Black Beer is not currently available in stores, but when up at their pub this past weekend they had six packs available for around $17. I hadn’t tried this before, but it sounded good and so we picked up a pack.

This beer is good.

I’m strongly reminded of New Holland’s Dragon’s Milk, but it’s been a long time since I’ve had a fresh bottle of it, and I really think that Short’s beer is better. I’m just slowly sipping this, and the glass will probably be empty in an hour or so. It’s also only 6.5%, which surprised me a bit.

This is really, really good.

Leave a Comment

The Bicycle Shop Saves The Day

This weekend was a Fun Promotions cross country race at Hanson Hills. Since I was going to be up north this weekend anyway for some family business and passing within miles of the race around my class’ start time, I planned on doing it. Unfortunately, while riding the Vasa Pathway the evening before I broke a spoke. Since it was too late to find an open shop to fix it I showed up at the race anyway hoping that the shop providing neutral race support could help me out. Within a couple minutes of walking over to the tent of Grayling’s The Bicycle Shop one of the shop guys took my wheel, ran over to his truck, hopped in, and headed towards the shop. Roughly 30 minutes later he was back with my wheel fixed and true. As seen glinting here on the rear wheel the replacement spoke is silver and not butted, but I could care less as it got my wheel working right again. I took a rather lowly 11th (out of 12) in the race, but it was fun, and that’s more of what I’m interested in.

Saturday was PA‘s burial up north, and the timing worked out so that on Sunday I would have been able to ride in the Hanson Hills XC race on the way home. While this was the only biking planned for the weekend, Danielle’s want for a nap on Saturday afternoon gave me some time to ride up to the Vasa pathway which was only ~3 miles by bicycle from the hotel. Once at the trail while taking a break to clean my glasses I ended up talking to a guy named Ryan who showed me around the trail route, including how it connects with the Vasa Singletrack. While riding along the single track I heard a slight ping sound, followed by what I thought was a stick in my spokes. Stopping for a bit showed it to be a broken spoke, so wrapped it around another spoke then carefully made my way out to the two track and began heading back to the hotel. Along the way I saw signs for Timber Ridge, finish line for Iceman, and called Danielle then headed there hoping for a ride to a bike shop to fix my wheel.

Unfortunately, as it was near bike shop closing time in TC no shops were able to help me, so Danielle and I instead headed off to Short’s Brewery in Bellaire where we tried some wonderful beers and had a particularly tasty dinner. Following this (and once back in TC) we stopped by Right Brain Brewery where (with the help of some responses on the MMBA Forum) we decided that the best plan would be to show up at the race anyway and see if someone would be able to help me out.

Over this weekend we also ate at quite a number of places, all of which were good. On the way up north we stopped by Bill Thomas’ Halo Burger in Birch Run, and this place both has tasty burgers, a classic (and enjoyable) fast food atmosphere, and uses its apostrophes correctly. Then there was Mabel’s Restaurant in Traverse City for an enjoyable breakfast on Saturday before PA’s burial, G’s Pizzaria in Kalkaska with family for lunch, Short’s for dinner, and Right Brain for a sort-of snack. On Sunday after the race we stopped in Spike’s Keg ‘O’ Nails for more tasty burgers (I had a patty melt) before heading home down I-75.

Here’s a bunch of photos from this weekend:

· Titus next to the car after a race at Hanson Hills after it’d fallen and lightly dented the fender. Note the shiny silver spoke which The Bicycle Shop of Grayling, MI fixed for me just before the start of the race.
· Waiting outside of Timber Ridge for a ride to hurridly get my wheel fixed.
· Broken spoke which unexpectedly let go while riding the Vasa single track.
· More of the tight tree area on the Vasa, this time looking down from above.
· Tight tree area on some uphill switchbacks on the Vasa trail.
· Deep fried pretzels from Spike’s Keg O Nails.
· Looking towards the bar area in Right Brain Brewery.
· No Marking sign at the Traverse City Fish Wier.
· No LARPing sign at the Traverse City Fish Wier.
· Stage and lower seating area at Short’s Brewing Company’s pub..
· Looking towards the bar at Short’s Brewing Company’s pub.
· Japanese Cowboy, a Vietnamese-style sandwich, at Short’s Brewing Company’s pub. This was very, very tasty.
· Danielle at Short’s Brewing Company with her beer sampler.
· Menu board at Short’s Brewing Company’s pub in Bellaire, MI.
· Waiting in the parking lot of Timber Ridge for Danielle to come pick me up after I broke a spoke.
· Deep fried apple pie at Bill Thomas’ Halo Burger in Birch Run, MI.
· Food for Danielle and I at Halo Burger in Birch Run, MI. I would definitely eat here again.
· Penis-shaped candy munched on in the car while stuck in traffic.

While focused around something outwardly sad, this weekend turned out to be really nice and I think that’s what PA would have wanted. Thinking back, I’m quite certain that a good part of my interest in being outdoors and poking around places comes from time spent with him. When I was little he and I would head up north and drive around seasonal roads in his white Izuzu P’up, exploring all manner of places where a vehicle like that shouldn’t really go. Whenever I see a seasonal road I think of that; and these are exactly the sort of things I think of when I head off on my bike just wanting to wander around and just see whats there.

1 Comment

Ragley Carnegie’s Bar on Salsa El Mariachi

Yesterday I fitted my new-ish single speed, the Salsa El Mariachi with a Ragley Carnegie’s Bar; the same handle bar that’s on the Titus. After tonight’s ride at Stony Creek with it I’m very, very happy with this as a single speed bar. At 80mm wider than the previous carbon fiber bar I had in place it’s a lot easier to rock the bike side to side while standing and pedaling, and the different hand position is much more comfortable to me.

I’m really starting to like how this bike feels, and even as a single speed it felt extremely fast to ride today. I think I’m going to enjoy riding this bike this year.

(I just have a few small quirks left to work out. Namely, there’s a small ticking noise that I think is coming from the stem/bar area, and the seatpost is slipping a little. The computer also isn’t working right, alternately logging way too fast of speeds or no data at all.)

4 Comments

Download Maps via QR Codes

While working up some revisions to the River Bends trail map for the trail head kiosk and I realized that having a QR code on it which links solely to a PDF of the same map might be a good idea. This would allow one to scan the code and download the map to a phone and keep an offline copy; exactly how one would want an electronic copy while out and about.

I think this would nicely augment the standard large map placed at the trail head and the typical paper map distribution box. One would just have to ensure that the link stays live for the life of the map. It might be a better idea to have the QR code on a separate smaller poster that just says “Scan Me to Download The Trail Map”, as it’d be cheaper / easier to update should the need arise.

This is probably the first productive use I’ve had for a QR code.

(The image above is a draft / mockup and links here to the current [but soon to be out of date] version of the map. Final implementation will definitely need more polish.)

2 Comments

Aggregate Shadows

I’ve always liked the aggregate shadows formed by the four discreet bulbs in the light fixture in the hallway bathroom. For once I finally took a photo of them, here as shown being cast by the latch on the door knob / lock.

Leave a Comment