Press "Enter" to skip to content

nuxx.net Posts

Polly Ann Trail / One Mile Short

Today Erik, Kristi, and I set out with the intention of riding to Imlay City, MI. Starting at the Clarkston Road crossing of the Paint Creek Trail (Map) this would have been a 45-ish mile ride. Unfortunately, poor trail conditions, culminating in a washed out bridge one mile south of I-69 slowed our progress enough that we decided to turn back. It’s good that we did, as we arrived back at the cars just as darkness was setting in; a particularly dangerous time for us as we were all without lights.

Along the trail we saw a number of interesting things, including a deer, cows, horses (on trail and off), turkeys, cats, squirrels, chipmunks (live and squished), grain being harvested, numerous dogs, and a discarded helmet shell. The surface also ranged from crushed limestone to pavement, single track through grassy areas to railbed ballast, to simple dirt.

At one point we happened across a what appeared to be some in-progress construction to replace an old drainage line under the trail. At the bottom of this 6′ deep ditch was a recently dead deer, looking as if it’d fallen in one night, been too injured to get out, and died. Traversing the ditch involved Erik climbing up the far side first, me passing the bikes to Erik, then Kristi and I climbing up. Unfortunately, for the first go Kristi didn’t want to climb up near the deer, and ended up scraping her leg a bit. The return trip worked a bit more efficiently.

Once past the first major obstacle we had to walk an expansive section of washed out rail bed, as it had become uneven and with leaf cover finding a safe path to ride through it was nearly impossible. One couldn’t tell if a depression in the ground is just a low spot, or something really dangerous. A bit beyond this was much more washed out area, a whole bridge! This article from Google’s cache talks a bit about the storms which washed out the area at the end of August.

Being only about a mile from I-69 we were a bit disappointed that we didn’t reach our goal of Imlay City, but the bridge made a nice place to stop and eat. It looks like only a few thousand dollars and a weekend of trail building crew would be needed to make the bridge passable again, so hopefully that’ll happen soon. We were also able to see the trail surface and know what will be required to do this ride again. Taking Sutton Rd. to Summers Rd., as seen here should easily bypass the washed out bridge and connect us nicely to Imlay City.

Per my bike computer, today’s ride was 38.29 miles, with a moving time of 3:25:55, 11.1 MPH average, and 30.9 MPH maximum speed. We started around 12:30 PM and returned to the parking lot around 5:00 PM.

Here’s today’s photos. Unfortunately I didn’t get any of the actually washed out parts of the bridge, nor the unsafe bits that I climbed across:

· Dead deer in a culvert crossing the Polly Ann Trail.
· My attempt at climbing the ditch. I failed, as this was not the easiest point to climb.
· Erik found a much better way to climb the new ditch in the Polly Ann Trail.
· I then handed the bikes to Erik, who pulled them up.
· Erik helping Kristi climb up, as she didn’t want to climb near the dead deer.
· This helmet shell, with a blob of foam on it, was found on the Polly Ann Trail.
· One part of the trail, about 3 miles before I-69, was washed out and uneven enough (particularly with leaf cover) that we walked it.
· Home-made sign warning that a bridge is out somewhere down the Polly Ann Trail, just south of I-69.
· First sign of the washed out bridge, one mile south of I-69.
· I climbed out on to the bridge. While the approaches were damaged, the main part of the bridge was solid.
· Kristi and Erik disappointed at the washed out bridge.
· Erik and Kristi looking at the washed out bridge on the Polly Ann Trail, showing the loose / unsupported part that I walked across.
· The body of the bridge itself is solid, but the approaches are gone.
· The point where the Polly Ann Trail crosses from Oakland County into Lapeer County is where its surface becomes much less maintained.

3 Comments

Let There Be Light!

Today my NiteRider TriNewt headlight was returned after being sent out for repair. NiteRider actually replaced the cable which had a short, replaced the switch, and sent a new helmet mount; all under warranty and free of charge. I was a bit surprised at the switch replacement, although in retrospect I had noticed that it felt a bit odd. I’d previously thought that I simply wasn’t familiar with its operation, but it turned out to be faulty as well.

As can be seen above it was also tested, with the battery illuminating the light for 3:16:00. I presume this to be on high, and this is plenty of time for my uses. Now I can get back to riding more at night. I’ve was loaned an HID which I’ve used from time to time, but being prone to fall damage and not being my light, I was hesitant to take it out very many places. Hopefully tomorrow evening when the weather is a bit nicer I’ll be able to head out for another ride.

Leave a Comment

Cascaded USB Hubs

As part of rewiring my office I purchased this seven-port USB hub from Firefold for $22.99, part number USB-7P-HUBSP. It turns out that this hub is actually two Genesys Logic GL852G hub chips, with one cascaded off of the other. The three ports shown above on the left are connected to the first hub, then the other four are connected to the second hub chip. Thus when the case is closed up (as seen here) ports 1-4 are on one hub which is connected to the hub that ports 5-7 are on. This shouldn’t cause a problem, but it’s a much cheaper design than using a seven port hub chip and having everything at the same level.

The hub also ships with a 5V 2.5A switching power supply. Having seven ports which can supply a maximum of 500mA each, this power supply cannot fully power the hub. That said, most devices never pull anywhere near 500mA, so this shouldn’t be a problem either.

Leave a Comment

Clean Celeriac

Danielle received a celeriac from the CSA, but we’ve yet to use it. It’s been stored in a bowl of water for a while, but the large amount of dirt in the roots was rotting and smelling very bad while changing the water, so tonight I washed it off and changed the water. On the upside it now smells like only celeriac, but unfortunately my hands also smell like celeriac. No amount of washing with Dr. Bronner’s Magic Soaps seem to cover it up. Oh well.

Hopefully we’ll use the celeriac in soup. Perhaps I’ll make some up this week, or maybe there will be time this weekend. Or maybe this particularly great looking recipe for celeriac and mascarpone puree. Mmm!

Leave a Comment

Printed In The Closet

Over the weekend I moved the printer into the closet. It’s much happier in there as there isn’t much dust, and it’s much more out of the way. After the Mac Pro is gone I can remove the rack, freeing up even more space. I’d originally had some network cable issues where things would link but not work, but a quick test tonight showed that one end wasn’t as well crimped as it should have been, so redoing that end sorted out the network.

Time was also spent on more mundane around the house chores, with some dishes being done, dead plants being removed from planters, patio furniture put away, and glass put in the storm doors. I’m hoping to clean some every day up until I leave on vacation. With the forecast of rain and snow for this week I don’t think I’ll be doing much biking, so there should be plenty of time. There’s something very nice about coming back from vacation to a clean house.

Leave a Comment

Nokian Hakka WXC300

Through the Daily Deal at Alfred E. Bike I was able to get a set of Nokian Hakka WXC300 studded mountain bike tires for just under $150. This is far cheaper than normal, and so low that should I not like / need / want the tires I will be able to sell them for what I paid.

When the tires are brand new, Nokian recommends that one ride for 30 miles on paved surfaces to finish setting the studs in the tires. I intend to do this, but only after looking over the tires and fixing the not-quite-seated ones, as shown above. I’m hoping that the tread of these, combined with the spikes, will make for nice winter riding on the mixed ice/snow that ends up covering local paths. Normally the ice isn’t an issue, but there were quite a few times where I flopped over quickly as the front wheel slid out from under me.

Here is a photo of the Nokian Hakka WXC300 tire in the package showing the general tread pattern and the terrible “Deserve Them” company slogan. I expect that the large well-spaced, abstract edge knobs will work nicely in snow.

Leave a Comment

Acoustically Dampened Hard Disk Shelf

With an iMac soon to replace my Mac Pro, I’ve had to set up some external disks to take care of extra storage and backup needs. Most hard disk enclosures contain fans and are a bit noisy, so I decided to move them to a place where I won’t be able to hear them: in the floor beneath my desk. As was done back when I had a fibre channel disk array in the basement I’m running a cable through the wall and floor, except this time the drives will be located sitting on an acoustically dampened (with neoprene) shelf, and connected via Firewire / IEEE1394b.

To build the shelf I used 1/2″ birch plywood and applied neoprene to most of it using contact cement (picture). A space was left for an APC Back-UPS ES (BE550G) which will be used to provide power to the disk enclosures (picture). The space above where the shelf will fit was then lined with the remaining neoprene, stapled in place using my Dad’s staple gun (picture). The board was then screwed in place using a number of drywall screws, with them concentrated around the UPS end, as it will bear more weight (picture). With a layer of neoprene between the base and the joists I didn’t tighten the screws down fully, as this should provide some additional isolation between the board and the floor.

I expect that once they are located on the shelf I will not be able to hear the fan in the rather noisy Vantec NexStar NST-400MX-UFB or the disk access in either it or the Macally PHR-100ACB. This will make for a nicely quiet computing experience in my office, with plenty of room to fit more Firewire disk enclosures should the iMac need additional expansion.

Leave a Comment

It’s Made Of People!

This power supply, the Solytech Enterprise Corporation AC Adapter Model AD5012G came with the Vantec NexStar NST-400MX-UFB that arrived today and I keep misreading the label as ‘Soylentech’. This disk enclosure will eventually be used with the replacement for my Mac Pro, a 27″ iMac with Core i7 processors. Since the iMac only has one internal disk I’ll be using Firewire disks to add additional spindles for virtual machines, Time Machine, etc. I’m still not sure where I’ll put the drives, but my current thought is either on the back side of my desk, or in the basement, suspended from the ceiling.

After first disconnecting it I found the fan in the NST-400MX-UFB to be necessary, as the drives were becoming quite warm without it. As this fan is fairly loud, I think I’ll be placing the drives in the basement, in a slightly soundproofed enclosure. Today after work I picked up a rather lengthy roll of neoprene from the foam factory and it should go quite a ways towards eliminating fan noise that may emanate from the enclosure through the floor. Some smart baffeling may cut down one the sound in the basement too.

Leave a Comment