SIP via Asterisk on Nokia E51

My current cell phone is a Nokia E51, one of Nokia’s more recent Symbian Series 60 cell phones. Beyond being a decent phone with a decent camera it also happens to do 802.11 wireless and be a SIP endpoint.

In short, this means that my cell phone can also be a VoIP client. Today, thanks to , my phone is working for making actual calls out via the public internet, into a server, then into the phone system.

Since there were a few quirks with getting this going I wanted to document the settings used in the phone for connecting to the Asterisk-based server.

First, make sure your phone has a valid wireless network connection available, which is done via Tools → Settings → Connection → Access points. Without a configured, functional AP your phone won’t be able to connect to the internet.

Now, to configure the phone itself, the following settings must be made:

Tools → Settings → Connection → SIP settings
Profile name: NameGoesHere
Service profile: IETF
Default access point: (Pick your access point from before.)
Public user name: sip:c0nsumer@sip.host.com
Use compression: No
Registration: Always on
Use security: No

Tools → Settings → Connection → SIP settings → Proxy server
Proxy server address: sip.host.com
Realm: asterisk
User name: c0nsumer
Password: PasswordGoesHere
Allow loose routing: Yes
Transport type: UDP
Port: 5060

Tools → Settings → Connection → SIP settings → Registrar server
Proxy server address: sip.host.com
Realm: asterisk
User name: c0nsumer
Password: PasswordGoesHere
Transport type: UDP
Port: 5060

Tools → Settings → Connection → Internet tel.
Create a profile with a name of your choice, then associate the SIP profile created earlier with this. This will set up one profile which can then be used to make calls across the network via VoIP.

After this, set your new NameGoesHere profile as the default via Tools → Settings → Connection → SIP settings → Options → Default profile.

With these settings your phone will always connect to the AP whenever it is found and register with the VoIP server. It will then be able to make and receive calls. Setting Registration to When needed makes the phone prompt before connecting to the AP and the SIP server when an attempt to dial an internet call is made. Inbound calls will not work in this case.