|
Checking the Hammond 1455T2201 case with the Millett Hybrid Maxed and Alien DAC PCBs. The Elna RFS (Silmic II) capacitors can also be seen.
Date: 09/13/2007
Views: 226
|
Transistors sorted with their values for use in the Millett Hybrid Maxed.
Date: 09/17/2007
Views: 144
|
The two pairs of 2SC2238/2SA968 transistors sent to me by someone from the DIYForums.org site which went into this Millett Hybrid Maxed.
Date: 09/18/2007
Views: 212
|
|
To make the volume pot fit as desired I sawed off the lug on the face. I scratched the face a bit in the process, but it didn't damage anything.
Date: 09/18/2007
Views: 105
|
Completed BJT output stage Millett Hybrid Maxed fitted with Du Mont 12FK6 tubes during power supply setup. I had a beer while doing the initial biasing.
Date: 09/18/2007
Views: 150
|
Fitting small wire loops for clipping on test leads makes setting up the MAX considerably easier. Here are the ones on the V+ and GND test points.
Date: 09/18/2007
Views: 127
|
|
The BJT output stage version of the Millett Hybrid Maxed set up and working with 12FK6 tubes, receiving audio from my iPod.
Date: 09/18/2007
Views: 139
|
Detail of the cut on my thumb when I was using a poor technique to remove the washer from a sems screw. It is fairly deep and runs all the way back to my nail.
Date: 09/18/2007
Views: 132
|
What's that in my MAX? Why, it's the first nuxx Audio Input Switch!
Date: 10/22/2007
Views: 151
|
|
Top view of my second Millett Hybrid Maxed with a nuxx Audio Input Switch in the same enclosure.
Date: 10/22/2007
Views: 198
|
|
|
