|
Black anodized medium Titus Racer X 29er frame hanging from my work stand with the bar gently attached, ready to be worked on.
Date: 12/22/2009
Views: 38
|
Parts for the bike, including BB7 brakes, SRAM Flak Jacket shifter and brake cable sets, Speed Dial 7 levers, Nite Rider Rebel 1.0 computer, SRAM Powerlinks, and a SRAM PG-990 cassette.
Date: 12/23/2009
Views: 32
|
Titus Racer X 29er, without grips, brakes, and with original plain grey cable housings.
Date: 12/23/2009
Views: 42
|
|
Incredibell Bellini (which I hope is loud enough) and Avid 185mm disc brake to post mount adapter.
Date: 12/23/2009
Views: 26
|
Avid Clean Sweep G2 rotors in 185mm and 160mm from my older bike to be used on the Titus Racer X 29er.
Date: 12/23/2009
Views: 21
|
The original SRAM PG-950 comes in at 449g.
Date: 12/23/2009
Views: 19
|
|
The SRAM PG-990 is 360g,
Date: 12/23/2009
Views: 20
|
Rear of the SRAM PG-990 (left) and PG-950 (right) show how different their construction is.
Date: 12/23/2009
Views: 25
|
SRAM PG-990 cassette on the wheel. The red lock ring will later have to be removed.
Date: 12/23/2009
Views: 23
|
|
160mm Avid Clean Sweep G2 on the rear wheel.
Date: 12/23/2009
Views: 19
|
Shimano Deore CN-HG53 chain, removed from the bike and ready to have the factory lube removed.
Date: 12/23/2009
Views: 19
|
The red arrow points to the gap between the SRAM PG-950 lockring on a PG-990 cassette. There is very little space here, and using the original aluminum PG-990 lockring causes binding.
Date: 12/23/2009
Views: 22
|
|
SRAM PG-990 cassette with PG-950 lock ring installed. This is needed to fit around the Titus Racer X 29er's derailleur hanger bolt.
Date: 12/23/2009
Views: 22
|
SRAM 9-speed Powerlink fitted on a Shimano Deore CN-HG53 chain
Date: 12/24/2009
Views: 23
|
Rear triangle and drivetrain showing fitted SRAM Flak Jacket cables and housings which make for fully sealed derailleur housings.
Date: 12/24/2009
Views: 32
|
