 |
The kegged beer cooler is complete, sitting in the basement, and is actively cooling what remains of two kegs of beer. Tonight I ran the gas lines, fitted everything into place, and set it up against one wall of the basement. It’s currently set to start cooling at 40°F and shut off at 35°F ambient temperature in the unit, which I expect to keep the beer at somewhere in that range. It may be necessary to narrow the band to something a bit narrower, but I’ll be able to determine that after putting a full keg of beer in the freezer and monitoring it.
I’ve been considering fitting the fridge with taps, but for the time being I think I’ll just stay with using picnic-style taps inside the unit. Actual beer faucets are around $100/each after considering all mounting hardware, and I don’t think they’ll provide enough benefit to justify doubling the cost of the unit.
Here’s some more notable photos of the unit throughout its progress:
· Completed chest freezer to beer keg conversion.
· Looking inside at two corney kegs, party tap-style dispensing lines, gas lines, temperature sensor, etc.
· Gas line transition from the compressor compartment into the body of the freezer. It is held in place with twist-type reusable cable ties.
· Temperature probe in place and gas line and Y fitted. Excess foam was left in place to serve as a hose guide.
· Operational Johnson Controls A419 temperature control indicating that it is currently cooling.
All of the photos can be found here. And yes, Roxie approves of it.