nuxx.net

Shimano PD-M540

Detail of the Shimano PD-M540 clipless pedals installed on my bike after cleaning it up and having the wheels trued.

While at Fraser Bicycle & Fitness (my preferred local bike shop) after work to get my bent wheel trued I ended up grabbing a pair of Shimano PD-M540 clipless pedals. I had originally been looking at the PD-M520 which has, but something about the PD-M540s jumped out at me. In particular, they are tightened down a bit differently (hex bit through the back side of the crank), and they appear to be easier to disassemble for overhauling (no need for a special tool). At US$79.99 they were only US$5 more than Amazon, so the price was pretty reasonable as well.

I was told that if my front wheel gets bent again, it’s most likely going to have to be replaced, but for now it’s pretty much straight. There’s a very slight wobble (1mm – 2mm at most), but it seems pretty good otherwise.

Before putting the wheels back on my bike I disassembled, cleaned, and greased the rear pulleys (jockey and tension). I also gave the the inside of the derailer cage and other dirty bits some special attention before giving the whole of the frame a washdown. It was pretty muddy from Saturday’s rainy ride and I wanted it clean again.

It was after 10pm so I didn’t want to test the new pedals out tonight, but hopefully I’ll be able to do that tomorrow. The cleats are fitted on my shoes, but I’m sure they’ll need some tweaking position-wise before I’m comfortable with them.

There are more photos of the pedals on this page, if you are interested.

Exit mobile version