 |
Well, that’s it. Mark Pulver’s Sequentix P3, serial number 008 is complete. I spent a good part of the evening tonight finishing it up. The biggest part was making this custom, reversing DIP28 to DIP28 cable so that the MemX expansion which was giving me problems yesterday could instead be mounted next to the main PCB. I then stuck the MemX down to a freshly cleaned case with two layers of foam adhesive.
I also replaced all of the mounting hardware for PCB which holds the MIDI ports with some slightly taller pieces. This made it so that the DIN5 / MIDI ports are properly centered in the cutout in the enclosure.
After being sure it was working I closed it up and gave it some final tests using a Radium 49 and MIDIbox SID-NUXX for testing the MIDI inputs and outputs. Everything is working, so this means its done and is ready to go back to Mark. That’ll be tomorrow’s task… Hopefully the post office won’t be too crowded.
