{"id":19645,"date":"2023-12-22T15:53:20","date_gmt":"2023-12-22T20:53:20","guid":{"rendered":"https:\/\/nuxx.net\/blog\/?p=19645"},"modified":"2023-12-23T07:09:48","modified_gmt":"2023-12-23T12:09:48","slug":"surprise-new-bike-day-2023-salsa-warbird-c-grx-600-1x","status":"publish","type":"post","link":"https:\/\/nuxx.net\/blog\/2023\/12\/22\/surprise-new-bike-day-2023-salsa-warbird-c-grx-600-1x\/","title":{"rendered":"Surprise New Bike Day: 2023 Salsa Warbird C GRX 600 1x"},"content":{"rendered":"
\n
\"\"<\/a><\/figure>\n<\/div>\n\n\n

It’s been no secret that for years my favorite drop bar bike was my beloved 2019 Salsa Warbird Carbon 105 700<\/a>. This bike has been with me on some of my most memorable rides, from remote parts of the UP and Canadian wilderness to silly northern LP bike path routes, from single track where it didn’t quite belong to long summertime wanders on dirt roads.<\/p>\n\n\n\n

For years, and especially in 2023 after switching it to 1x, I’ve told numerous folks that there’s nothing I’d change on it and no reason to get anything new; it’s simply excellent. But then in late November while cleaning it up for winter I found a bit of a shock: a small starburst crack in the frame at the top tube\/seat tube junction and a couple other hairline cracks on the seat tube. As things wear out and everything eventually fails I can’t say I was devastated, but I really was disappointed. I loved riding that bike and did not want to change anything. I even came to really like the white color.<\/p>\n\n\n\n

After finding the crack I rode it a couple more times and things seemed fine. I have a long seatpost which extended well below the crack area, and I didn’t feel or hear anything when riding, but like any crack it’s best to be safe. The warranty for a carbon frame is five years, which was coming up, so I sent photos of the crack to the folks over at the venerable Tree Fort Bikes<\/a> and Salsa<\/a> to get things rolling. I wasn’t sure if it was problematic, and — honestly — I really didn’t want to replace the frame if it wasn’t needed, but I wanted to ask. I love how my Warbird looks with the white frame and reflective black vinyl that I added, and I wasn’t exactly keen on a matte black replacement, re-running brake lines, etc. And, it rode great!<\/p>\n\n\n\n

After just a handful of questions Craig emailed me with a massive surprise: Salsa is replacing my 2019 Warbird (v4) frame with a complete 2023 Warbird C GRX 1x bike<\/a>, and instead of being a simple black warranty replacement it’s a nice clay-ish grey color! This was better than I could have possibly hoped for, because not only did it replace the problematic frame, it moved me to Shimano’s GRX drivetrain! And I also wouldn’t have to cut and re-run the brake lines, etc.<\/p>\n\n\n\n

Back when my Warbird came out GRX wasn’t available, so it came with the (very good) 105 R7000 road groupset. This is an amazingly good drivetrain, but for rougher roads I switched to the Ultegra RD-RX800 derailleur, which was basically a high-end road derailleur with a clutch, originally intended for cyclocross use. Then in late 2022 I used a few Wolf Tooth Components parts and made it a sorta-hacky yet very functional 1x drivetrain because I wanted to get away from the problems inherent with 2x and riding in poor conditions, notably gunking up a front derailleur.<\/p>\n\n\n\n

This setup worked great, but I felt a bit limited by maximum cassette size (40t) and my left brifter had a disconnected shift lever, which would rattle around on chattery roads. Minor, I know, and while I was proud of the semi-hacky drivetrain, improvements such as a full GRX drivetrain would have been nice, but I couldn’t justify it when things worked so well. But suddenly now I had it!<\/p>\n\n\n\n

Last week I picked up the bike from Tree Fort, and over some unseasonably rainy, cold, and blah afternoons I shuffled parts around and now it’s ready. My new gravel bike, a 2023 Salsa Warbird C GRX 1x with a few upgrades!<\/p>\n\n\n\n

Build<\/h2>\n\n\n\n

Frame \/ Fork:\u00a0<\/strong>2023 Salsa Warbird Carbon \/ Salsa Waxwing<\/a> (Light Grey)
Wheelset:<\/strong>\u00a0Specialized Roval Terra C<\/a>
Ratchets:<\/strong>\u00a0DT Swiss HWTXXX00NSK54S<\/a> (54T)
Tires:<\/strong> Specialized Pathfinder Pro 2Bliss Ready<\/a> (700×42, Black Sidewall)
Crank:<\/strong>\u00a0Shimano FC-RX810-1<\/a> (42T, 172.5mm)
Bottom Bracket: <\/strong>Shimano SM-BB72-41B<\/a>
Cassette:<\/strong>\u00a0Shimano CS-M8000<\/a> (11-42)
Right Shift\/Brake Levers:<\/strong> Shimano ST-RX600-R<\/a>
Left Shift\/Brake Levers:<\/strong><\/strong> Shimano BL-RX600-L<\/a>
<\/strong>Brake Calipers: <\/strong>Shimano BR-RX400<\/a>
Brake Rotors:\u00a0<\/strong>Shimano SM-RT64<\/a> (160mm)
Brake Pads: <\/strong>Shimano K05S-RX<\/a> (Resin)
Chain: <\/strong>Shimano CN-HG601-11<\/a>
Rear Derailleur:<\/strong> Shimano RD-RX812<\/a>
Bar Tape:<\/strong> MSW HBT-300 Anti-Slip Gel+<\/a> (Black)
Handlebar:<\/strong> Salsa Cowbell Deluxe<\/a> (44cm)
Headset:<\/strong> Cane Creek Hellbender 70<\/a>\u00a0(IS41\/28.6\/H9 | IS52\/40)
Stem: <\/strong>Thomson Elite X4<\/a> (SM-E139 10\u00b0 X 100mm X 31.8 1-1\/8 X4 Black)
Spacers:<\/strong>\u00a0Generic Aluminum
Stem Cap:<\/strong> MASH Donut 2.0<\/a>
Seatpost:<\/strong> Thomson Elite<\/a> (SP-E113SB 27.2 X 410 Setback, Black)
Seatpost Clamp:<\/strong>\u00a0Salsa Lip Lock<\/a>
Saddle:<\/strong> Specialized Power Expert<\/a> (143mm, Black)
Pedals:<\/strong> Shimano PD-M8100<\/a>
Bottle Cages:<\/strong> Specialized Zee Cage II<\/a>\u00a0(2x Left, 2x Right)
Bottle Cage Screws:<\/strong> McMaster-Carr 94500A233<\/a> (316 Stainless, M5 x 0.8mm, 20mm)
Front Light:<\/strong> Outbound Lighting Detour<\/a>
Rear Light:<\/strong> Garmin Varia RTL515<\/a>
Rear Light Mount:<\/strong> Garmin Varia Seat-post Quarter Turn Mount<\/a>
Bell:<\/strong>\u00a0RockBros Bell<\/a> (Black)
Computer:<\/strong> Garmin Edge 840<\/a>
Computer Mount:<\/strong> SRAM Quickview Computer Mount<\/a>
Sensors:<\/strong> Garmin Bike Speed Sensor<\/a>\u00a0(Front Wheel), Garmin Cadence Sensor 2<\/a> (Crank)
Anti-Rub Tape:<\/strong> McMaster-Carr 76445A764<\/a> (Low-Friction UHMW Tape, 0.0115″ Thick, 2″ Wide)
Mounting Hole Plugs:<\/strong> Heyco 2590<\/a>
Top Tube Bag:<\/strong> Revelate Designs Mag-Tank Bolt-On<\/a>
Saddle Bag:<\/strong> Lezyne Road Caddy<\/a>
Frame Pump:<\/strong> Lezyne Sport Drive HP<\/a>
Derailleur Hanger:<\/strong> 465 \/ QBP FS2322<\/a><\/p>\n\n\n\n

Weight<\/h2>\n\n\n\n

Total weight for the bike, with everything but bottles (including lights, pump, saddle bag+tools, and computer), is 22.54 pounds. Removing the computer\/lights\/saddle bag\/pump brings it down to 20.78 pounds, so I expect that without pedals, cages, or mounts (the usual way of weighing a bike) it’d be in the 19-pound range.<\/p>\n\n\n\n

Build Choices:<\/h2>\n\n\n
\n
\"\"<\/a><\/figure>\n<\/div>\n\n\n

Crank\/Cassette Upgrade:<\/strong> After moving my previous Warbird to 1x a year ago<\/a> I realized that I like having a 42t front ring. Since the bike came with a 40t ring I wanted to upgrade that, but it turned out that I could get a complete FC-RX810<\/a> crankset with a 42t ring for not much more than a stand-alone ring. Swapping from the stock FC-RX610<\/a> swap saved 84g while increasing the chainring size, makes mounting a cadence sensor easier, and opens up the possibility of getting a power meter on the bike. <\/p>\n\n\n\n

At the same time I ordered an CS-M8000<\/a> cassette to replace the stock CS-M5100<\/a>, which saved another 114g. While I originally was going to get an 11-40 to match my previous Warbird, my friend Ray convinced me that a 42, ending up with an even 1:1 in the lowest gear would be good, and I agreed. Between the two sizes the seven lowest cogs are the same, so typical flat\/rolling stuff would feel the same with either, but when I do need a climbing\/trail gear it’ll be there.<\/p>\n\n\n\n

Chain Drop Protection:<\/strong> I was originally going to fit some chain drop protection, like the Wolf Tooth LoneWolf<\/a>, but after thinking about how many times I’ve dropped a chain in the past, I opted against it. Mounting this would also require fitting a front derailleur mount which makes bottle cage mounting more fiddly and makes the bike harder to clean. I may still fit this later on, but for now I’m content continuing without.<\/p>\n\n\n\n

Rotors:<\/strong> I am generally very fond of Shimano rotors with solid aluminum center carriers as they seem to be harder to bend and have an aluminum core (Ice Technologies<\/a>) to help with heat dissipation. The bike came with some SM-RT64<\/a>, and while they are a bit heavier per-rotor (~25g) than others, and just steel, it would have cost a fair bit (~$100) to replace them. I have similar rotors on my fatbike and they’ve been working well, so for now I’m going to stick with these rotors and see how it goes. They can always be upgraded later.<\/p>\n\n\n

\n
\"\"<\/a><\/figure>\n<\/div>\n\n\n

Frame Pump\/Saddle Bag:<\/strong> On the previous Warbird I used a somewhat large Specialized saddle bag with a tiny 4″ pump<\/a> tucked inside next to the tube. This worked well, but I began having problems with the pack Velcro no longer holding, so I also had a releasable cable tie holding it to the saddle.<\/p>\n\n\n\n

I’d also never needed — that is tested — the tiny pump in the field, so out of an abundance of caution (and some paranoia) I’d often tuck a second, larger pump in my jersey pocket for long rides. This other pump had been used a few times, so with the bike swap I’ve moved to mounting the beloved (and cheap) Lezyne Sport Drive HP<\/a> to the frame behind the seat tube bottle cage. I’m wary of road spray causing problems with the pump, but if it does I’ll just start carrying it in my pocket.<\/p>\n\n\n\n

By no longer needing room for a pump in the bag I was able to swap to the Lezyne Road Caddy<\/a>, a small and elegant seat bag that I’ve had on my road bike for a couple years.<\/p>\n\n\n\n

Bike Fit:<\/strong> This and my road bike, a custom built Salsa Warroad<\/a>, are very very similar in geometry, but I’ve had it set up with the bars slightly lower than on the Warbird. Using my favorite stem comparison tool<\/a> I found that by removing 10mm of spacers below the stem I can get the bar clamp to a nearly identical position on both bikes, so as a bit of an experiment I’m giving this a go, leaving the steerer tube uncut so I can go back if desired.<\/p>\n\n\n\n

I’m slightly concerned about the fit when riding more technical trails, and I may have a harder time keeping my forearms near level while on rough surface, but it’s plenty easy to go back if needed.<\/p>\n\n\n\n

Bottle Cage Screws:<\/strong> When using Specialized Zee Cages<\/a> it’s important to have a low profile screw head, else they’ll rub on the bottle and make it hard to insert. The screws which come with the cages are a nice shape, but are a chromed steel that seems to corrode with sweat, sports drink, and road treatment chloride, so I prefer something else. I prefer something like 316 stainless, and I had some 20mm of these laying around from a previous project. For just-bottle-cages this is longer than the needed ~15mm, but the additional mass is across the three standard cages is only 6x 1\/4 of the mass of a single screw (1.5x a single screw), or ~5g. It wasn’t worth spending $11+shipping to save that little mass.<\/p>\n\n\n

\n
\"\"<\/a><\/figure>\n<\/div>\n\n\n

Anti-Rub Tape on Head Tube:<\/strong> On my previous Warbird, and on the Warroad, I shortened the front brake hose so it’d take a clean path from the fork to the bar, not touching the head tube. This works, but also gets it the way of the light mount, and makes adjusting spacers difficult because I have to remove the bar from the stem to slide things upward.<\/p>\n\n\n\n

The stock hose length on this model rubs the front of the head tube, but I’m not sure I want to shorten it yet. For now I simply put a strip of UHMW PE tape along the front of the head tube, below the Salsa logo, so the hose won’t rub on the frame\/paint\/carbon. Once I settle on spacers and work a bit more on accessory mounting I may shorten the hose, or I may just leave this alone.<\/p>\n","protected":false},"excerpt":{"rendered":"

It’s been no secret that for years my favorite drop bar bike was my beloved 2019 Salsa Warbird Carbon 105 700. This bike has been…<\/p>\n

Continue readingSurprise New Bike Day: 2023 Salsa Warbird C GRX 600 1x<\/span><\/a><\/div>\n","protected":false},"author":2,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[23,10],"tags":[],"class_list":["post-19645","post","type-post","status-publish","format-standard","hentry","category-acquired-things","category-cycling","entry"],"amp_enabled":true,"_links":{"self":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts\/19645","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/comments?post=19645"}],"version-history":[{"count":13,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts\/19645\/revisions"}],"predecessor-version":[{"id":19666,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts\/19645\/revisions\/19666"}],"wp:attachment":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/media?parent=19645"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/categories?post=19645"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/tags?post=19645"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}