Photo<\/a>)<\/p><\/blockquote>\n","protected":false},"excerpt":{"rendered":"This is a JAE D03 connector used for Atari SIO, pulled from the Okidata printer controller mentioned earlier. I used this to draw a part…<\/p>\n
Continue readingJAE D03 SIO Connector<\/span><\/a><\/div>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[6,11],"tags":[],"class_list":["post-1171","post","type-post","status-publish","format-standard","hentry","category-electronics","category-making-things","entry"],"amp_enabled":true,"_links":{"self":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts\/1171","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/comments?post=1171"}],"version-history":[{"count":4,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts\/1171\/revisions"}],"predecessor-version":[{"id":1175,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts\/1171\/revisions\/1175"}],"wp:attachment":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/media?parent=1171"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/categories?post=1171"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/tags?post=1171"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}} ![\"JAE](\"https:\/\/nuxx.net\/gallery\/v\/stuffivemade\/sdrive_nuxx\/sio_connectors\/IMG_3182.jpg.html?g2_imageViewsIndex=2\")
<\/a><\/td>\n<\/tr>\n<\/table>\n![side by side photos here<\/a>) the footprint will work for these as well. Additionally, I pulled open all of the Atari hardware I have here and found that all the SIO connectors seemed to be one of these two types.<\/p>\nThe Japanese-made hardware (1010 and 1027) had the thick-based JAE D03 connectors and the other stuff (1050 from Singapore and 800XL from Hong Kong) had some clone of the thin-based part. I had to adjust the outline slightly because the thin based parts have a somewhat larger footprint, but this wasn’t a big deal as the pads all matched.<\/p>\nI was a bit disappointed to find out that the parts from B & C ComputerVisions are pulls, complete with slightly bent \/ solder-y pins<\/a> and dirt on them<\/a> but they washed up nicely and should be fine to use.<\/p>\nFor reference, here’s the four different (two types) of SIO connectors I’d found, taken from this post that I made at AtariAge asking if anyone knows of any different part styles<\/a>:<\/p>\nJAE D03<\/strong>: In all the Japanese-made Atari hardware I have. Thick base, well made. Held down with self-tapping screws or riveted in place. (Photo<\/a>)\nMX 7514-4-13<\/strong>: Received from B & C ComputerVisions when I ordered two connectors. I expected them to be new, but they are very obviously pulls (dirty parts \/ slightly bent pins \/ solder on pins). (Photo<\/a>)\nCO12995 5-82-4 MEC-5<\/strong>: Inside a Hong Kong-made 800XL. Appears identical to the MX 7514-4-13. Riveted in place. (Photo<\/a>)\nUNKNOWN<\/strong>: Connector similar to the previous two, in a Singapore-made 1050. I could read TAIWAN on the back, but while I could ensure it’s not the same as the part in the 800XL I couldn’t make out the rest of the part numbers. Held down to the PCB only by the 15 pins and nothing in the larger holes. (Photo<\/a>)<\/p><\/blockquote>\n","protected":false},"excerpt":{"rendered":"This is a JAE D03 connector used for Atari SIO, pulled from the Okidata printer controller mentioned earlier. I used this to draw a part…<\/p>\nContinue readingJAE D03 SIO Connector<\/span><\/a><\/div>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[6,11],"tags":[],"class_list":["post-1171","post","type-post","status-publish","format-standard","hentry","category-electronics","category-making-things","entry"],"amp_enabled":true,"_links":{"self":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts\/1171","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/comments?post=1171"}],"version-history":[{"count":4,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts\/1171\/revisions"}],"predecessor-version":[{"id":1175,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts\/1171\/revisions\/1175"}],"wp:attachment":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/media?parent=1171"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/categories?post=1171"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/tags?post=1171"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}](\"https:\/\/nuxx.net\/gallery\/v\/stuffivemade\/sdrive_nuxx\/sio_connectors\/IMG_3202.jpg.html\"){kind=link}
![slightly bent \/ solder-y pins<\/a> and](\"https:\/\/nuxx.net\/gallery\/v\/stuffivemade\/sdrive_nuxx\/sio_connectors\/IMG_3205.jpg.html\"){kind=link}
![dirt on them<\/a> but they washed up nicely and should be fine to use.<\/p>\nFor reference, here’s the four different (two types) of SIO connectors I’d found, taken from this post that I made at AtariAge asking if anyone knows of any different part styles<\/a>:<\/p>\nJAE D03<\/strong>: In all the Japanese-made Atari hardware I have. Thick base, well made. Held down with self-tapping screws or riveted in place. (Photo<\/a>)\nMX 7514-4-13<\/strong>: Received from B & C ComputerVisions when I ordered two connectors. I expected them to be new, but they are very obviously pulls (dirty parts \/ slightly bent pins \/ solder on pins). (Photo<\/a>)\nCO12995 5-82-4 MEC-5<\/strong>: Inside a Hong Kong-made 800XL. Appears identical to the MX 7514-4-13. Riveted in place. (Photo<\/a>)\nUNKNOWN<\/strong>: Connector similar to the previous two, in a Singapore-made 1050. I could read TAIWAN on the back, but while I could ensure it’s not the same as the part in the 800XL I couldn’t make out the rest of the part numbers. Held down to the PCB only by the 15 pins and nothing in the larger holes. (Photo<\/a>)<\/p><\/blockquote>\n","protected":false},"excerpt":{"rendered":"This is a JAE D03 connector used for Atari SIO, pulled from the Okidata printer controller mentioned earlier. I used this to draw a part…<\/p>\nContinue readingJAE D03 SIO Connector<\/span><\/a><\/div>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[6,11],"tags":[],"class_list":["post-1171","post","type-post","status-publish","format-standard","hentry","category-electronics","category-making-things","entry"],"amp_enabled":true,"_links":{"self":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts\/1171","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/comments?post=1171"}],"version-history":[{"count":4,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts\/1171\/revisions"}],"predecessor-version":[{"id":1175,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts\/1171\/revisions\/1175"}],"wp:attachment":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/media?parent=1171"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/categories?post=1171"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/tags?post=1171"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}](\"https:\/\/nuxx.net\/gallery\/v\/stuffivemade\/sdrive_nuxx\/sio_connectors\/IMG_3206.jpg.html\"){kind=link}
![Photo<\/a>)\nMX 7514-4-13<\/strong>: Received from B & C ComputerVisions when I ordered two connectors. I expected them to be new, but they are very obviously pulls (dirty parts \/ slightly bent pins \/ solder on pins). (Photo<\/a>)\nCO12995 5-82-4 MEC-5<\/strong>: Inside a Hong Kong-made 800XL. Appears identical to the MX 7514-4-13. Riveted in place. (Photo<\/a>)\nUNKNOWN<\/strong>: Connector similar to the previous two, in a Singapore-made 1050. I could read TAIWAN on the back, but while I could ensure it’s not the same as the part in the 800XL I couldn’t make out the rest of the part numbers. Held down to the PCB only by the 15 pins and nothing in the larger holes. (Photo<\/a>)<\/p><\/blockquote>\n","protected":false},"excerpt":{"rendered":"This is a JAE D03 connector used for Atari SIO, pulled from the Okidata printer controller mentioned earlier. I used this to draw a part…<\/p>\nContinue readingJAE D03 SIO Connector<\/span><\/a><\/div>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[6,11],"tags":[],"class_list":["post-1171","post","type-post","status-publish","format-standard","hentry","category-electronics","category-making-things","entry"],"amp_enabled":true,"_links":{"self":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts\/1171","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/comments?post=1171"}],"version-history":[{"count":4,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts\/1171\/revisions"}],"predecessor-version":[{"id":1175,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts\/1171\/revisions\/1175"}],"wp:attachment":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/media?parent=1171"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/categories?post=1171"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/tags?post=1171"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}](\"https:\/\/nuxx.net\/gallery\/v\/stuffivemade\/sdrive_nuxx\/sio_connectors\/IMG_3203.jpg.html\"){kind=link}
![Photo<\/a>)\nCO12995 5-82-4 MEC-5<\/strong>: Inside a Hong Kong-made 800XL. Appears identical to the MX 7514-4-13. Riveted in place. (Photo<\/a>)\nUNKNOWN<\/strong>: Connector similar to the previous two, in a Singapore-made 1050. I could read TAIWAN on the back, but while I could ensure it’s not the same as the part in the 800XL I couldn’t make out the rest of the part numbers. Held down to the PCB only by the 15 pins and nothing in the larger holes. (Photo<\/a>)<\/p><\/blockquote>\n","protected":false},"excerpt":{"rendered":"This is a JAE D03 connector used for Atari SIO, pulled from the Okidata printer controller mentioned earlier. I used this to draw a part…<\/p>\nContinue readingJAE D03 SIO Connector<\/span><\/a><\/div>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[6,11],"tags":[],"class_list":["post-1171","post","type-post","status-publish","format-standard","hentry","category-electronics","category-making-things","entry"],"amp_enabled":true,"_links":{"self":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts\/1171","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/comments?post=1171"}],"version-history":[{"count":4,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts\/1171\/revisions"}],"predecessor-version":[{"id":1175,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts\/1171\/revisions\/1175"}],"wp:attachment":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/media?parent=1171"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/categories?post=1171"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/tags?post=1171"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}](\"https:\/\/nuxx.net\/gallery\/v\/stuffivemade\/sdrive_nuxx\/sio_connectors\/IMG_3204.jpg.html\"){kind=link}
![Photo<\/a>)\nUNKNOWN<\/strong>: Connector similar to the previous two, in a Singapore-made 1050. I could read TAIWAN on the back, but while I could ensure it’s not the same as the part in the 800XL I couldn’t make out the rest of the part numbers. Held down to the PCB only by the 15 pins and nothing in the larger holes. (Photo<\/a>)<\/p><\/blockquote>\n","protected":false},"excerpt":{"rendered":"This is a JAE D03 connector used for Atari SIO, pulled from the Okidata printer controller mentioned earlier. I used this to draw a part…<\/p>\nContinue readingJAE D03 SIO Connector<\/span><\/a><\/div>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[6,11],"tags":[],"class_list":["post-1171","post","type-post","status-publish","format-standard","hentry","category-electronics","category-making-things","entry"],"amp_enabled":true,"_links":{"self":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts\/1171","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/comments?post=1171"}],"version-history":[{"count":4,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts\/1171\/revisions"}],"predecessor-version":[{"id":1175,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts\/1171\/revisions\/1175"}],"wp:attachment":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/media?parent=1171"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/categories?post=1171"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/tags?post=1171"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}](\"https:\/\/nuxx.net\/gallery\/v\/stuffivemade\/sdrive_nuxx\/sio_connectors\/IMG_3194.jpg.html\"){kind=link}
![Photo<\/a>)<\/p><\/blockquote>\n","protected":false},"excerpt":{"rendered":"This is a JAE D03 connector used for Atari SIO, pulled from the Okidata printer controller mentioned earlier. I used this to draw a part…<\/p>\nContinue readingJAE D03 SIO Connector<\/span><\/a><\/div>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[6,11],"tags":[],"class_list":["post-1171","post","type-post","status-publish","format-standard","hentry","category-electronics","category-making-things","entry"],"amp_enabled":true,"_links":{"self":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts\/1171","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/comments?post=1171"}],"version-history":[{"count":4,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts\/1171\/revisions"}],"predecessor-version":[{"id":1175,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/posts\/1171\/revisions\/1175"}],"wp:attachment":[{"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/media?parent=1171"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/categories?post=1171"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/nuxx.net\/blog\/wp-json\/wp\/v2\/tags?post=1171"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}](\"https:\/\/nuxx.net\/gallery\/v\/stuffivemade\/sdrive_nuxx\/sio_connectors\/IMG_3192.jpg.html\"){kind=link}