Press "Enter" to skip to content

Day: December 29, 2008

Bianchi D.I.S.S.

Detail of the Salsa seat clamp on the Bianchi D.I.S.S., along with the Cars-R-Coffins art.

I’d intended to hold off on purchasing a new bike for a while, but over the weekend Nick pointed me at this thread at mmba.org where someone was offering up a Bianchi D.I.S.S. (Disc Integrated Single Speed) with decent specs and in approximately my size (large) for US$300. It looked to have some good quality parts on it (including pedals which fit my current cleats), so I made arrangements to check it out and possibly buy it. Conveniently, I was owed just about the sale price by my parents so I was even able to purchase it without affecting CC or bank account balances.

Shaun (the seller) and I met up today and when I took a look at the bike it seemed to be just what I’d been wanting a few months back when I was considering a much more expensive Raleigh. It needed a bit of adjusting, but after tweaking the brakes, tightening the crankshaft, tightening up the chain a little, putting some screws in the bottle cage mount holes, and adjusting the stem it feels like quite a nice fit and was definitely a good buy.

The only thing I have left to do is reseat the rear tire (it’s a little off and has a slight skip) and possibly rebuild the rear hub (bearings are audible; or maybe that’s the freewheel). There is one non-fixable problem with it, as the tool surface for dust cap for the crank is stripped, but as the crank can still be adjusted it’s not an actual problem. I might replace the dust cap anyway, if I come across one.

Oh, and one of the best parts? Since it’s a single speed it has sliding dropouts, and these normally make it a pain to seat the rear wheel after removing it. However, this bike has a Surly Tuggnut on it, which doubles as a bottle opener. I don’t really have an interest in drinking and riding, but I did make a point of using it tonight, with nothing less than Arbor Brewing Company’s Tree Fort Beer.

Here are a couple more photos I took of the bike and its various bits tonight:

· Bianchi D.I.S.S. which I purchased for $300.
· Detail of the Salsa seat clamp on the Bianchi D.I.S.S., along with the Cars-R-Coffins art.
· Surly Tuggnut on the Bianchi D.I.S.S.. Yes, it is also a bottle opener.
· The dust cap on the crank set has been stripped. I’m not sure how this happened, but at least I can still remove the crank.
· Edoardo Bianchi badge on the head tube of the Bianchi D.I.S.S..
· My somewhat modified Specialized Rockhopper and Bianchi D.I.S.S., sitting side by side in my office.
· Bianchi D.I.S.S., photo #1 sent to me prior to the sale.
· Bianchi D.I.S.S., photo #2 sent to me prior to the sale.

After getting home with the bike I put Roxie in the car, locked myself out of the house (thankfully my parents happened to be near by and helped me out), then drove over to Fraser Bicycle & Fitness and picked up a bike stand, floor pump (because the SKS Airworx one I got before doesn’t work right), and some spare bottle cage bolts. Roxie loved the ride.

Leave a Comment