|
Album: Design Documents
Date: 02/01/2009
Size: 23 items
Views: 105
|
Album: SIO Connectors
Various SIO connector photos from during part footprint development.
Date: 02/05/2009
Size: 14 items
Views: 44
|
Testing out LEDs on a breadboard to ensure they are all the same brightness. It'd be bad if the front panel LEDs varied too much.
Date: 02/04/2009
Views: 327
|
|
Another, closer, darker image to better see that the yellow, red, and green LEDs are all comparably bright.
Date: 02/04/2009
Views: 90
|
Being sure that the HRS DM1AA-SF-PEJ(21) SD card slot matches the EAGLE footprint I drew for it.
Date: 02/04/2009
Views: 149
|
Test fitting the 120mm deep v0.4-PROTOTYPE PCB mockup in the Hammond 1455L1201 enclosure.
Date: 02/09/2009
Views: 72
|
|
It seems that my SIO connector footprint is good. Yay!
Date: 02/09/2009
Views: 61
|
With the top of the case in there is plenty of room above the SIO connector. This is good.
Date: 02/09/2009
Views: 54
|
Because the PCB can slide past the bezel I will be able to make the PCB 3mm longer so that it will sit directly against the front and rear panels.
Date: 02/09/2009
Views: 79
|
|
The panel template which I drew in Illustrator seems to match a real front panel. This is good.
Date: 02/13/2009
Views: 68
|
Sample material / printing for the other panel material which I am considering for the front and rear panels.
Date: 02/13/2009
Views: 72
|
Detail of a yellow warning on the anodized aluminum material.
Date: 02/13/2009
Views: 68
|
|
Detail of black and white text on sample panel material. This is about 5mm tall. The detail seems limited to the grain of the metal.
Date: 02/13/2009
Views: 83
|
Detail of a countersunk through hole on the sample piece.
Date: 02/13/2009
Views: 69
|
Detail of a punched cutout.
Date: 02/13/2009
Views: 68
|
